Product DescriptionRidetech 4-Way Analog Compressor System with 5-Gallon Tank.
Ridetech kept the budget builder in mind when designing the RidePro manual control 4-way compressor system. Everything you need to control your air springs is included in this kit. The control panel uses two dual needle air pressure gauges and four switches that activate the RidePro air valves. Each air bag will be controlled separately from one another with the four individual switches. Included gauges make evening pressure simple.
- AMK Compressor
- Analog Control Panel
- RidePRO Valve Block
- Five Gallon Tank
- 1/4" Airline and Fittings
Ridetech's universal control panel can be mounted in any location but should be within arms reach. Dual needle gauges help you keep an eye on each air spring's air pressure so you can adjust the springs as needed. Feeding air to the air springs is Ridetech's RidePro valve block. The high quality valve block features laser etched port markings and weatherpak wiring connectors. RidePro solenoids use exclusive bubble tight air valves.
A 5-gallon aluminum tank measures 32" long and 7" in diameter and can hold plenty of air to take care of raising and lowering your Mustang. Ridetech uses a single AMK compressor to fill the extra large the 5-gallon tank. The AMK compressor is quieter, more powerful and draws less power than the standard 327 compressor. This compressor pumps a volume of .91cfm @ 150psi and draws a maximum of 27 amps. Connecting all of the units is 1/4" air line which will supply more than enough air for your Mustang.
*This system can be upgraded to a full RidePro e3 system by adding the e3 controller package and/or level sensors at a later date.
Similar Mustang PartsMore Mustang Suspension Kits
This product will fit the following Ford Mustang years:
- Not Yet Rated
- 0 Reviews
You Might Also Like
CJ's Low Price: $1499.99
CJ's Low Price: $1699.99
CJ's Low Price: $1799.99
CJ's Low Price: $1999.99