Ridetech 4-Way RidePro Digital Computer Control AirPod Compressor System with 5-Gallon Tank.
Ridetech offers ultimate control of your air suspension system with their RidePro Digital computer control system. This kit includes everything you need to control your air springs and allows you to raise and lower your car with the simple push of a button. Keep tabs on your air pressures with the digital control pad. The AirPod saves tons of time as the whole system is pre-mounted.
- AMK Compressor
- 4-way RidePro Digital Computer
- RidePRO Valve Block
- Five Gallon Tank
- 1/4" Airline and Fittings
The brain of the AirPod is the RidePro Digital control system. Gain unparalleled levels of control with accuracy, repeatability, versatility, dependability, visibility and a wide range of other abilities all at the push of a button. A handheld control panel is only 3/8" thick and features an auto-dimming transflective display. Interface buttons are back lit and have a distinct "click" to let you feel when you have made a change. Two mini USB connections are offered to allow a variety of panel mounting and connection options.
In addition to the three ride height presents and the "ride height on start" feature, the calibration process, weight compensation and crossload compensation are now all automatic. Finding and fixing problems is much easier with error detection and troubleshooting menus. Solid state compressor relays are built-in to eliminate external relays and wiring. The Digital ECU uses M12 twist connections and is now waterproof which allows mounting in any location on your vehicle. The Digital leveling system is compatible with any air suspension and is a great upgrade to your current system.
A 5-gallon aluminum tank measures 32" long and 7" in diameter and can hold plenty of air to take care of raising and lowering your Mustang. Feeding the tank is an AMK compressor. Ridetech's strongest compressor pumps a volume of .91cfm @ 150psi and draws a maximum of 27 amps. Feeding air to the air springs is Ridetech's RidePro valve block. The high quality valve block features laser etched port markings and weatherpak wiring connectors. RidePro solenoids use exclusive bubble tight air valves. Connecting all of the units is 1/4" air line which will supply more than enough air for your Mustang.
The most appealing aspect of this kit is that everything is pre-wired, pre-plumbed and pre-tested. You will only have to make four plumbing connections and three wiring connections. All components are mounted on a water jet cut ABS board. The assembly is compact which allows for easy installation. AirPod's barely increase weight as the whole assembly is only 24 lbs. Simply install the AirPod with four bolts and save 10-15 hours of installation time.
*Does NOT include the cover. Cover sold separately.
Similar Mustang PartsMore Air Ride Suspension
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$1,499.99
CJ's Low Price:$1,699.99