Ridetech Digital Remote and Smart Phone Control Kit.
Your friends will know you can raise your Mustang up and down, but will they know you can do this all outside of the car? With Ridetech's remote control system, you can change your Mustang's ride height while standing several yards away. The key fobs are small and can be attached to your key ring so you will never forget them. If you don't feel like carrying around the key fob, you can just use your iPhone or Android. Choose any of your three ride height presets with the key fob, or go a step further and gain full control with your smart phone. Whether you want to raise the car to get a look at the suspension underneath, set the drivable ride height or slam it, Ridetech's key fob and smart phone app do it all.
- Two Key Fob Transmitters
- Wiring Harness
- Bluetooth Antenna Box
- Application Software
Ridetech's Digital remote control is a great upgrade for your RidePro Digital control system. You can gain full control of your air suspension without even sitting inside your Mustang. Simply install the wiring and antenna needed to send and receive signals from the key fobs. The key fobs include three buttons labeled 1, 2 and 3. Each number matches up to one of your RidePro Digital preset ride heights.
This kit includes the ability to use your iPhone or Android device to control the air suspension as well. Bluetooth technology is utilized for superior security and connectivity. Landscape mode imitates the Digital digital controller. Your phone will display live information on air tank and air spring pressures. Not only are the three ride height presets available, but also controls for each vehicle corner.
Using your phone's bluetooth connection, the application will send remote commands to your Digital system through an external antenna. The antenna relays important information back to the phone such as air and tank pressure. Menu items can also be changed via your smartphone just like the original Digital display.
*Digital remote control only works with RidePro Digital control system.
Similar Mustang PartsMore Restomod Suspension
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$1,800.00
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$2,000.00
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$1,500.00
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$1,700.00
Josh:First of all, we're going to start out at the rear. We're taking out the old 88, or old 8-inch. We're going to put an 88 in because of all the modern upgrade options we could use. Hanging that rear end is going to be the Ride Tech four-link set up. It's a bolt-in four-link adjustable upper bars. The basic starting point of the whole RideTech rear four-link set up is this triangulated bracket, which will work with any rear end 9-inch, 88, 8-inch rear that you could use in your '65, '66. It bolts into factory suspension mounting component places. So, it's a really easy installation.
Along with that, you get your lower link bars, which are polyurethane bushings that are fully greaseable. You have upper link bars that are fully adjustable with high-end joints on one end and urethane bushings on the other, and all the brackets that are needed to bolt it in. These are the front RideTech bags which are double-convoluted bags with adjustable rebound settings for valving for the shocks.
Bill:These are the ShockWaves?
Josh:Yes, they're the ShockWave. Then the rear ShockWaves are the sleeve-style bags. They're also adjustable valve shock valving and adjustable for obviously pressure and height.
Bill:Now this kit is obviously going to be specific to our build, but they do make this kit for pretty much any Mustang, correct?
Josh:Yes. We have kits that follow a whole way from your '64 1/2 Mustang all the way up to your 2014, definitely obviously different configurations for the cars, but yes, you can put any Mustang ever made on air.
Bill:Now, while that stuff is specific to your car, all the electronics that run everything, I'm assuming are pretty much universal.
Josh:Yes, they're universal. You got the same computer compressors, wiring, valves, control unit, everything's the same for any year car that's all going to be the same.
Bill:Now what's unique about the Ride Pro Digital? I know the iPhone tie-in, iPhone or 'droid tie-in with the Bluetooth is very cool. Tell me a little bit more about that system there.
Josh:Well, that's an add-on to your system. The Ride Pro Digital, it's an electronic system. You don't have a gauge that's an analog-style gauge. You have a digital gauge. You can read tank pressure. You can read pressure in each bag. Basically, there are whole of different controls you could have electronically with this system. Everything's controlled from this control panel, instead of having rocker switches to put your air in and let your air out. Everything's controlled electronically.
Bill:The controller, I see with the iPhone app here, it's pretty much the exact same controller that's mounted in the car, just a digital version that you control straight from your phone.
Josh:Absolutely, yeah. It's the exact same thing. You can just do it wirelessly away from your car or play around, do whatever you want, impress your friends, whatever. It allows you to just do what you would do in the car out of the car.
Bill:The remote controls that come with it are, I'm assuming, presets?
Josh:Yes, they're presets. You'll get a low, a middle and a high and you set them for what you want to set them.
Bill:So, you have your low for a parking lot, your medium would be your normal driving, performance driving. Then you can have a high for going over speed bumps, whatever.
Josh:Speed bumps, whatever, potholes, construction, whatever. So you could have that car, it rides low, looks awesome, but you don't have to worry about running in, scraping the bottom of your car, or ripping your lifts off or whatever else you put in your car.
Bill:It seems something like this with the tank that we're using, roughly how long is it going to take to go from that slam-the-ground setting up to a normal ride setting?
Josh:Seconds. Probably five seconds, something like that. It's very quick. This is the RideTech three-gallon tank that we're using for our build. They also offer a five-gallon tank. We have that kit available also. This Ride Pro Digital that we're using with the three-gallon tank is our part Pro 3 and we also have a Pro 5 with the five-gallon tank, if you need a larger capacity.
Bill:A larger tank, does that speed up the process at all?
Josh:It just gives you a more reserve of air when you've got to pump it up if you're playing with it a lot. The compressor's not running as long, but in a light little car like this, three gallons is plenty. These are your Ride Pro valves. They're a full-billet valve. You got all your exhaust and pressurizing valves in there.
Everything is controlled by the computer and it just tells these what to do. You put all your sensors in here. It reads all your gauges. It will read on this, tell you what your pressures are in your bag. Also, there'll be another sensor for your tank pressure also. So you'll always know what pressure's in your tank and what pressure's in your bags. That's how you can set your presets. Then you got a supply line that gives it air. Then on this side is where all the air gets pushed out to the bags to actually fill them up.
Bill:This is what the control looks like on the car, that we can also program from our iPhone or android device. Each of these boxes will show the pressure in each ShockWave device. The bottom there will show how much tank pressure you have so can keep an eye on everything from your phone or the controller in the car.
Now we have our killer suspension setup ready, the next thing I'm going to do is put our cross-member in. You got the rear ready. You can start off by putting the suspension in the car. You can subscribe to our You Tube channel for more updates on our project 50/30.