Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit For Use With Ridetech Air Ride Shockwaves Manual Steering Modular V8 1965-1973

Rod & Custom Motorsports: RC-107-ARSD-MOD-W11
CJ's Low Price:
$3,849.99
1481414400 66907
Earn 3849 RPM Points What's this?
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit For Use With Ridetech Air Ride Shockwaves Manual Steering Modular V8 1965-1973
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit For Use With Ridetech Air Ride Shockwaves Manual Steering Modular V8 1965-1973 Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit For Use With Ridetech Air Ride Shockwaves Manual Steering Modular V8 1965-1973 Play Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit For Use With Ridetech Air Ride Shockwaves Manual Steering Modular V8 1965-1973 Video 1
Rod & Custom Motorsports

Product Description

Rod & Custom Motorsports Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System and a Wilwood Brake Kit for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Modular V8 Mustangs with Manual Steering and Ridetech Air Ride Shockwaves.

Continue taking your 1965-1973 Modular V8 Mustang with Manual Steering and Ridetech Air Ride Shockwaves to new performance heights by adding this Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System from Rod & Custom Motorsports. You'll receive all of the supplies you need to totally convert your Mustang's OE suspension to a more modern rack and pinion while also improving your overall handling & braking performance. You will also be able to solve any potential clearance issues that you may have under your hood.

The main feature of this package is its ability to let you run with air ride shocks so you can easily adjust the height and stance of your ride. You'll get improved corner control and much needed engine bay clearance. Each aspect of this swap has been crafted with top grade steel and manufactured with the buyer's needs in consideration.

Kit Includes:
- Upper & Lower Tubular Control Arms
- Manual Rack & Pinion Assembly
- Specific Shockwave Mounts
- 11" Front Disc Brake Kit (In Your Choice of Brake Option)
- Crossmember
- Stainless Steel Flex Front Brake Lines
- Pair of Shock Tower Replacement Panels
- Steering Shaft Kit
- 1" Front Sway Bar Kit
- Motor Mounts
- Spindles
- Steering Column Modification Kit
- All Necessary Mounting Hardware

Specifically designed to be used on classic Mustangs that are equipped with Ridetech Air Ride Shockwaves, this kit comes with mounts that are specific to those shocks. The rack & pinion comes with the proper ends and bushings that you'll need for a proper install. Rod & Custom also makes sure to include all of the necessary bearings, nuts, seals and other hardware for putting this conversion on your vintage Pony.

Required Information:
- Year of Mustang
- Engine Size

When you purchase this conversion, you'll be required to provide the year of your classic Mustang as well as its engine size. You'll also have a choice on your hands, as this kit is offered with multiple brake options. You'll be able to choose whether you want plain rotors, slotted & drilled rotors or a Wilwood brake kit. The Wilwood brake kit features 11" Dynalite drilled & slotted two-piece vented rotors as well as forged four piston black aluminum calipers. The calipers will allow you to use smaller diameter wheels, letting your vintage Pony be the ultimate sleeper.

Wheel and Tire Fitment Notes:
- For optimum tire clearance CJ Pony Parts strongly recommends no wider than a 7” wheel
- A 7” wide wheel will need to have 4” to 4-1/2” of backspacing
- An 8” wide wheel is possible, but must have custom backspacing
- All 15”, 16” and 17” wheels are acceptable and recommended
- Some 14” wheels will fit with this kit, however most will not

*This is available for V8 engines ONLY, as Rod & Custom Motorsports does not have motor mounts for the inline 6-cylinder engines.
*This is the same kit that was used on CJ Pony Part's Project 50/30 Mustang.

Please Note: This conversion kit is specifically designed to be used with Ridetech's Air Ride Shockwaves (Part # 21120101 that are NOT included within this kit and are sold separately.

Warning: A rear sump oil pan is required with this kit.

Tech Tip: Please check the diagram in the installation instructions for 15" wheel fitment.

So hurry up and purchase this Rod & Custom Motorsport Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Modular V8 Mustang with Manual Steering and Ridetech Air Ride Shockwaves from CJ Pony Parts today!

 

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 103.1ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 107.35ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like