Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit Manual Steering Push Rod V8 1965-1973

Rod & Custom Motorsports: RC-106-MS-W11
CJ's Low Price:
$3,899.99
1480723200 66889
Earn 3899 RPM Points What's this?
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit Manual Steering Push Rod V8 1965-1973
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit Manual Steering Push Rod V8 1965-1973 Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit Manual Steering Push Rod V8 1965-1973 Play Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit Manual Steering Push Rod V8 1965-1973 Video 1 Play Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit Manual Steering Push Rod V8 1965-1973 Video 2 Play Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System And Wilwood Brake Kit Manual Steering Push Rod V8 1965-1973 Video 3
Rod & Custom Motorsports

Product Description

Rod & Custom Motorsports Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System and a Wilwood Brake Kit for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Push Rod V8 Engine and Manual Steering.

Rod & Custom Motorsports understands quality verses affordability. That's why all of Rod & Custom's kits are designed with top grade steel, intense quality control procedures and manufactured with the buyers needs in consideration. With Rod & Custom, you can be confident in knowing you have purchased and installed the highest quality, best fitting, most affordable rack and pinion independent front suspension on the market today!

Kit Includes:
- Crossmember
- Shock Tower Replacement Panels
- Motor Mounts
- Springs
- Shocks
- Upper and Lower Tubular Control Arms with Urethane Bushings
- Manual Steering Rack and Pinion
- Rack Ends and Bushings
- Steering Shaft Kit
- Steering Column Modification Kit
- 11" Front Disc Brake Kit
- Stainless Steel Flex Front Brake Lines
- 1" Front Sway Bar Kit
- Spindles with Nut Kit
- Bearings and Seals

By adding this kit to your Mustang, you will gain more adjustability and better handling from your suspension. You will find an increase in your cornering ability and a much better overall ride quality. This American made kit also completes 2 huge jobs; upgrades your steering and upgrades your front brakes. By using one of these kits you will gain an extra 7" of engine clearance on each side!

Required Information:
- Year of Mustang
- Engine Size

When you make this purchase, you will need to know the year and engine size of your Mustang. You’ll also have the option of choosing whether you desire plain brakes or brakes that are slotted and drilled. A Wilwood brake options is also offered that sees an 11" Dynalite 4-piston kit with black calipers. The calipers themselves are forged four piston aluminum and the rotors are 11" drilled and slotted two-piece vented. Wilwood Dynalite Calipers allow you to use smaller diameter wheels so your Mustang can be the ultimate sleeper.

Wheel and Tire Fitment Notes:
- For optimum tire clearance CJ Pony Parts strongly recommends no wider than a 7” wheel
- A 7” wide wheel will need to have 4” to 4-1/2” of backspacing
- An 8” wide wheel is possible, but must have custom backspacing
- All 15”, 16” and 17” wheels are acceptable and recommended
- Some 14” wheels will fit with this kit, however most will not

*This is available for V8 engines ONLY, as Rod & Custom Motorsports does not have motor mounts for the inline 6-cylinder engines.
*A rear sump oil pan is required with this kit.

Warning: This kit will NOT work with 14" or 15" 1965-1967 styled steel wheels, as the hub portion of the rotor will not fit within the wheel.

Please Note: All components come with a black powder coated or bare-steel finish. The picture shows red components for display purposes only.

Tech Tips: Please check the diagram in the installation instructions for 15" wheel fitment. CJ Pony Parts also uses Fox Body Long Tube Headers when installing this kit on 1965-1973 Mustangs with a 289, 302 or 351W engine.

So go ahead and order this Rod & Custom Motorsports Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a Push Rod V8 Engine and Manual Steering from CJ Pony Parts today!

 

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 95.71ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 103.93ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like