Rod & Custom Motorsports Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System and a Wilwood Brake Kit for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Modular V8 Engine and Power Steering.
Transform your 1965-1973 Mustang that has a Modular V8 Engine and Power Steering by purchasing this Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System from Rod & Custom Motorsports. This swap will provide you with everything you need to successfully make a conversion to a more modern power rack and pinion assembly. This package will significantly increase the performance of your classic Mustang's handling and braking, as well as help solve any clearance issues that may be associated with installation a larger modular engine.
- Upper Spring & Shock Mounts
- Complete Upper & Lower Tubular A-Arm System
- Brake Kit in Three Options (Factory, Drilled & Slotted or 11" Wilwoods)
- Power Rack
- Pair of Complete Tie Rod Ends
- Set of Complete Prothane Polyurethane Engine Mounts
- 1" Powder Coated Sway Bar
- Driver & Passenger Side Tower Replacement Panels
- Steering Hook-Up Kit
- All Necessary Mounting Hardware
This conversion kit is highlighted by a brand new crossmember that comes with new spindles, springs and shocks. The spindles are of factory height while the spring & shocks come with upper mounts and are rated to your vintage Pony. The mounts for your engine are complete prothane polyurethane and are specifically designed for 4.6L-5.4L modular engines, including the popular 5.0 Coyote.
This kit also includes a four piece tubular a-arm assembly that is complete with the necessary hardware you'll need. The power rack for your steering assembly features the proper bushings & mounting hardware as well.
This conversion also comes with a sway bar that is powder coated and 1" in diameter. The sway bar includes mounting brackets, end links, prothane bushings, fasteners and all other hardware. You'll also receive a steering hook-up kit that includes a new rack joint, column joint, rack-to-column shaft and a column modification kit if you have an OEM steering column.
- Year of Mustang
- Engine Size
When you purchase this kit, it is required that you know and provide the year of your Mustang, as well as its engine size. You also have the option to choose from three different brake kit options, including whether you want plain rotors or ones that are slotted and drilled. A Wilwood brake kit is also offered as an option. This specific brake option features 11" drilled & slotted two-piece vented rotors and Dynalite four piston black aluminum calipers. The calipers will let you use smaller diameter wheels.
Wheel and Tire Fitment Notes:
- For optimum tire clearance CJ Pony Parts strongly recommends no wider than a 7” wheel
- A 7” wide wheel will need to have 4” to 4-1/2” of backspacing
- An 8” wide wheel is possible, but must have custom backspacing
- All 15”, 16” and 17” wheels are acceptable and recommended
- Some 14” wheels will fit with this kit, however most will not
*This is available for V8 engines ONLY, as Rod & Custom Motorsports does not have motor mounts for the inline 6-cylinder engines.
*A rear sump oil pan is required with this kit.
Warning: This kit will NOT work with 14" or 15" 1965-1967 styled steel wheels, as the hub portion of the rotor will not fit within the wheel.
Please Note: All components come with a black powder coated or bare-steel finish. The picture shows yellow components for display purposes only.
Tech Tips: Please check the diagram in the installation instructions for 15" wheel fitment.
So go ahead and order this Rod & Custom Motorsports Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a Push Rod V8 Engine and Power Steering from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System Power Steering Modular V8 1965-1973From:CJ's Low Price:$3,399.99
CJ's Low Price:$265.50
CJ's Low Price:$265.50
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System Power Steering Push Rod V8 1965-1973From:CJ's Low Price:$3,249.99
Rod & Custom Rack And Pinion/Disc Brake Conversion Kit With Tubular A-Arm System Manual Steering Modular V8 1965-1973From:CJ's Low Price:$3,299.99