Rod & Custom Motorsports Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System, Coilover Kit and Drop Spindles with a Wilwood Brake Kit for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Modular V8 Engine and Power Steering.
Take your 1965-1973 Mustang to new performance heights by purchasing this Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System and Coilover Kit from Rod & Custom Motorsports. Specifically designed to work with your classic Mustang's Modular V8 Engine & Power Steering, this swap will provide you with all of the parts and hardware that you'll need to completely convert your existing OE suspension to a more modern-style power rack & pinion assembly.
The main feature of this assembly is the coilover spring package that will provide you with the ability to mechanically adjust the ride height and stance of your Mustang. You'll be able to do it easily and correctly, letting you enjoy more corner control and engine bay clearance. Once this conversion kit with fully mounted into place, you'll immediately notice an improvement in your handling and braking while also solving any clearance issues you may have with your larger V8 engine.
- Power Rack & Pinion with Bushings
- Four Piece Upper & Lower Tubular A-Arm Assembly
- Coilover Shocks & Springs with Grade 8 Mounting Hardware
- Steel Stock Height MII Spindles or 2" Drop Spindles
- Front Brake Kit (Available in 3 Styles)
- Steering Hookup Kit
- Upper Coilover Mounts
- Set of Complete Prothane Polyurethane Engine Mounts
- Pair of Tie Rod Ends
- Driver & Passenger Side Tower Replacement Panels
Besides the coilovers, this kit is highlighted by a brand new power rack & pinion and a four-piece upper & lower tubular a-arm assembly. You'll also receive a steering hookup kit that includes a new rack joint, column joint, rack-to-column shaft and a column modification kit if you have an OE steering column. The conversion kit's sway bay has an outside diameter of 1" with a powder coated finish. It includes mounting brackets, end links and prothane bushings. The set of engine mounts you'll receive are complete prothane polyurethane and are specific for 4.6L-5.4L modular engines, including the popular 5.0L Coyote.
- Year of Mustang
- Engine Size
When you purchase this conversion, you'll be required to provide the year of your classic Mustang as well as its engine size. You'll be able to decide whether you want 2" drop spindles or not. This option will lower your Mustang two full inches over your original height.
You'll also have the option of picking which type of brake kit you want with your conversion, including brakes with plain rotors or ones that are slotted & drilled. A Wilwood brake option is also provided that features an 11" Dynalite 4-piston kit with black calipers. The calipers themselves are forged four piston aluminum and the rotors are 11" drilled and slotted two-piece vented. Wilwood Dynalite Calipers allow you to use smaller diameter wheels.
Wheel and Tire Fitment Notes:
- For optimum tire clearance CJ Pony Parts strongly recommends no wider than a 7” wheel
- A 7” wide wheel will need to have 4” to 4-1/2” of backspacing
- An 8” wide wheel is possible, but must have custom backspacing
- All 15”, 16” and 17” wheels are acceptable and recommended
- Some 14” wheels will fit with this kit, however most will not
*Available for V8 engines ONLY, Rod & Custom Motorsports does not have motor mounts for the inline 6-cylinder engines.
*A rear sump oil pan is required with this kit.
Warning: This Rod and Custom Front Suspension kit will not work with 14" or 15" 1965-1967 Styled Steel Wheels. The hub portion of the rotor will not fit within the wheel.
Please Note: All components come with a black or bare-steel finish. The picture shows red components for display purposes only.
Tech Tip: Please check the diagram in the installation instructions for 15" wheel fitment.
Go ahead and purchase this Rod & Custom Motorsports Rack and Pinion/Disc Brake Conversion Kit with a Tubular A-Arm System and Coilover Kit for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a Modular V8 Engine and Power Steering from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$280.99
CJ's Low Price:$280.25