Roofrail Foam Adhesive Backed 12’ 1965-1973

CJ's Part Number: RF
CJ's Low Price:
$10.99
1469232000 28882
when you purchase a roll of roofrail foam you might be interested in the items listed below.
CJ's Low Price:
$56.99
Qty
Earn 10 RPM Points What's this?
Roofrail Foam Adhesive Backed 12’ 1965-1973
Roofrail Foam Adhesive Backed 12’ 1965-1973 Play Roofrail Foam Adhesive Backed 12’ 1965-1973 Video 1

Product Description

Single 12 Foot Section of Roofrail Adhesive Backed Foam for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

When installing new roofrail weatherstrip make sure you have all the components necessary for a factory correct build. This roofrail foam gets mounted between the roofrail weatherstrip channel and the body of your 1965-1973 Mustang. The adhesive side of the roofrail foam should be attached to the roofrail weatherstrip channel. This will help protect the paint from getting damaged and allow a tight seal around the windows on your Mustang.

Features:
- Fits 1965-1973 Mustangs
- Adhesive Backing
- 12' Roll
- Sold individually

Please Note: This Roofrail Foam is sold individually, two are required per 1965-1973 Mustang.

This roofrail foam will work on any 1965-1973 Mustang. The adhesive backing is strong enough to hold up for years of use. The 12' section of roofrail foam is enough to do one side of your Mustang, two rolls are required for a proper installation. The dense foam helps seal the gap between the body of your Mustang and the roofrail channel.

If you jump into your Mustang and notice wet floor or upholstery, especially after a rainstorm or a trip to the car wash, it might be time to check out your weatherstrip, to see if it is cracking or missing and needing immediate replacement. For many Mustangs, CJ Pony Parts has any piece of individual weatherstrip you need, plus full weatherstrip kits, so you can completely replace every piece, keeping water outside where it belongs.

Purchase a new Single 12 Foot Section of Roofrail Adhesive Backed Foam for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Convertible Weatherstrip  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Roofrail Foam Adhesive Backed 12’ 1965-1973 is rated 4.333333333333333 out of 5 by 3.
Rated 4 out of 5 by from Fit perfectly, wish it'd come with more Fits to the roof channel perfectly, and most importantly, it's the right thickness. Best to buy two rolls of these though, as you'll need an extra four feet or so to finish the job. It's pricey for the extra footage, but you can always use the extra on your interior panels to prevent small rattles.
Date published: 2015-10-06
Rated 4 out of 5 by from Little pricey for foam, but fit right and worked I decided to pull the trigger and get these to make sure I had the right size for the back of the weather stripping track on my '70 Mach 1 when I reinstalled it. The fit was just right and it worked well.
Date published: 2015-06-24
Rated 5 out of 5 by from roof rail seal Worked out great needed an extra layer to add to the roof rail for a good window seal
Date published: 2016-03-04
  • 2016-07-23T07:33CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_RF, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 212.14ms
  • REVIEWS, PRODUCT

Product Questions

If you already have roofrail weatherstrip, then where does the foam adhesive go. I can't see any space for it

Asked by: vpriga
The roofrail foam is located between the roofrail weatherstrip channel and the body. The adhesive side of the roofrail foam should be attached to the roofrail weatherstrip channel.
Answered by: CJ Pony Parts
Date published: 2015-09-30

what is the dimension of the roofrail adhesive backed foam weatherstrip

Asked by: scottstuff
Unfortunately, that data is not available.
Answered by: CJ Pony Parts
Date published: 2015-09-25

If the drip rail goes between the roofrail weatherstrip channel and the body, and this foam attaches to the weatherstrip channel, then the foam will bear on the bottom of the drip rail. What is recommended for the space between the drip rail and the body?

Asked by: Ol Dad
  • 2016-07-23T07:33CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_RF, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 142.61ms
  • QUESTIONS, PRODUCT

You Might Also Like

Product Video

Roofrail Foam Adhesive Backed 12’ 1965-1973 Video Transcript
By Bill Tumas: We’re here with a 12 foot roll of roofrail foam, fitting your 1965-1973 Mustang. The roofrail foam is an important part in sealing the roofrail channel. When installing on any 1965-1973 Mustang coupe or Mustang fastback. This is adhesive. This is actually going to stick to the roofrail itself. Then, the channel will get stuck to this and screw in through it for installation to properly seal the channel before installing your roofrail weather strip. This is sold in a 12 foot roll. You will need two rolls for your fastback or coupe. In addition to the foam, the roof rail channels for certain models and roofrail weather strip are all available at CJPonyParts.com.