Rough Country 2.5-3" Leveling Kit for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 and 2016 Toyota Tundras with 4WD.
One of the most innovative ways to level the front of your 2007-2016 Toyota Tundra with the rear, while allowing you to dial in the angle you want, is this 2.5-3" Leveling Kit from Rough Country. It comes with everything you'll need for an easy bolt-on installation, including hardware and two sets of 0.25" spacer shims.
Features & Benefits:
- Easy Bolt-On Installation
- Increases Ground Clearance
- Can Accommodate Up to a 33" Tire
- Maintains Factory Ride Quality
- Levels the Front with the Rear of the Vehicle
- No Strut Disassembly or Strut Compressor Required for Installation
- Differential Spacers Maintain Proper Front CV Axle Angle
- Adjustable: Shim Plates Allow You to Fine Tune the Front Amount of Lift
This Rough Country 2.5-3" Leveling Kit 870 can accommodate up to a 33" tire, and the 0.25" spacer shims can be used with the strut spacers so you can fine-tune and adjust your level angle based on your specific preferences and needs. For example, if you use your Tundra to haul a lot of heavy items, you can still leave a little rake in your front end angle to compensate for those items.
You'll get about 3/8" of lift from each shim. You can use both to get a full 3" level or use fewer to leave some rake in the front end angle: your choice! The components were specifically designed by Rough Country's in-house Research and Development team, so they are engineered for a perfect and precise fit every time. The components will integrate very well with your factory parts and equipment. But the best thing about this kit is you can easily remove each part if you want to return your Tundra back to its stock height! Plus, you won't have to worry about sacrificing the factory ride quality that you're used to. The set of differential spacers will help maintain this ride quality and promote optimum angles for the front CV axle after it's lifted. Installation is simple. It's a bolt-on installation job that should take you just a few hours to complete.
This Kit Includes:
- Upper Strut Extensions
- Differential Mounting Spacers
- Skid Plate Spacers
Please Note: This kit does NOT fit TRD Pro Series models and XSP-X models.
*Shims may not be required for TRD models.
Order a Rough Country 2.5-3" Leveling Kit 870 for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 or 2016 Toyota Tundra with 4WD from CJ Pony Parts today!
Product ReviewsWrite a review
Hello I'm very interested in the leveling for the Toyota Tundra. I have a 2016 Crewmax TRD. I noticed on watching videos that they did not used the 4 plates like you have listed. What are those plates used for? I will be doing the work myself.
You Might Also Like
CJ's Low Price:$59.95
This is a direct build on kit without requiring the need to dissemble the struts and it will retain the factory rod quality. This rough country leveling kit along with other parts for your Tundra can be found at cjponyparts.com.