Rovos 18" x 10.5" Satin Gunmetal Durban Wheel for 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs.
Rovos Wheels nailed the five spoke design with their Durban wheel offering. The Durban wheel brings a new look to a wheel market with conservative styling. Unless you're trying to spend several thousand dollars on a custom set of forged wheels, there's a void between inexpensive low quality wheels and high-end custom offerings. Without sacrificing quality, Rovos Wheels fills that void with their truly unique and affordable Durban wheels.
This 18" x 10.5" Durban wheel has five wide spokes that extend outward, just stopping short of the outer edge of the wheel. Small details like this make the Durban wheel stand apart from other Mustang wheels offered. The deep concave style of the rear 18" x 10.5" wheels match up perfectly with the semi-deep concave of the narrower 18" x 9" front wheels. Reverse mount construction is created from a step that sits behind the spokes. Once machining is complete, this Durban wheel is powder coated satin gunmetal. Finishing off the wheel is a black center cap with a Rovos logo chrome outer ring.
Rovos wheels are constructed with 99.9% pure aluminum. They are low pressure cast from the ground up to insure the strongest wheel possible. All of the Rovos wheels are powder coated throughout their entire process. First, a powder coated primer is used to fill any imperfections. Then the final powder coat color is applied.
|Size:||18" x 10.5"|
This Rovos wheel requires small diameter, tuner style lug nuts. Larger OEM style lug nuts will NOT work.
Like all Rovos wheels, the 18" x 10.5" Durban wheel is low pressure cast. Low pressure casting uses positive pressure to move the molten aluminum into the mold quicker. This helps improve mechanical properties and achieve a finished product that is denser than a gravity cast wheel. Low pressure casting is the most common process approved for aluminum wheels sold to the OEM market and it offers a good value for the aftermarket as well. Although low pressure casting has a slightly higher production cost over gravity casting, it allows for a higher quality product.
Please Note: The 18" x 10.5" wheel is intended for use on the rear of your Mustang. Wider rear wheels have a deeper concave to enhance the look of a staggered setup.
One of the easiest ways to get the biggest visual impact from an upgrade to your 1994-2004 Mustang is by adding some new wheels from CJ Pony Parts. If you're trying stray away from common replica style wheels, add a set of unique Rovos Wheels so your Mustang can be one of a kind. With the addition of matching tires, your Mustang can look amazing in no time!
Purchase this Rovos 18" x 10.5" Satin Gunmetal Durban Wheel for your 1994, 1995, 14996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
Hello, have your wheels a part certificates? I need the part certificates so that I can entered the rims in Germany in my vehicle registration. Sorry for my bad english
Are your front rims 18x9 and what size tire in the front
Will the Rovos Durban Wheel 18"x10.5" be okay on the back of 2000 Mustang GT at stock ride height?
Just picked up a set of these for you guys what style lug nut do these wheels take.
Looking at ordering the set of staggered wheels but was also looking at lowering the car about a inch to inch and a half and was checking clearance for a 2004 GT without rubbing.
You Might Also Like
From:CJ's Low Price:$269.00
CJ's Low Price:$1,449.99
CJ's Low Price:$199.00
The wheels themselves are available in two different sizes. You have an 18x9, which can be used in the front or all the way around, and an 18x10.5 for the back if you want that staggered look. The two colors available exclusively on the SN95 fitment are going to be your matte gunmetal grey shown here as well as the gloss black.
Concave wheels are definitely all the rage right now. The Durban has got the most concave fitment we've seen yet on an SN95 wheel. Even the front has a nice dish to it. Even the front has got a little bit of a concave to it. It matches perfectly with the rear wheel.
These front wheels can also be used for Fox Body fitment when converted to five-lug. These Rovos Durban wheels are sold individually, as a set of four, or in a package with tires.