Set of Rovos 20" x 8.5" and 20" x 10" Satin Gunmetal Durban Wheels with 255/35-20 and 275/35-20 Nitto INVO Tires for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs.
With trends in the Mustang wheel market staying fairly conservative, it's not too often that a wheel manufacturer comes along and brings something completely new to the table. Unless you're trying to spend several thousand dollars on a custom set of forged wheels, there's a void between inexpensive low quality wheels and high-end custom offerings. Rovos Wheels is here to fill that void without sacrificing quality and achieving a truly unique appearance with their Durban Wheels.
This 20" x 10" Durban wheel has 5 wide spokes paired together for a truly unique appearance. The spokes feature a Satin Gunmetal finish and deep concave giving the wheel a race inspired look. A slight lip sits just behind the spokes on the barrel with a Satin Gunmetal powder coated finish. Rovos wheels are constructed with 99.9% pure aluminum. They are low pressure cast from the ground up to insure the strongest wheel possible. All of the Rovos wheels are powder coated throughout their entire process. First, a powder coated primer is used to fill any imperfections. Then its powder coated to its color.
The 20" diameter wheel provides a large amount of clearance for big brake kits and has no problem fitting around factory 15" Brembo brakes. The Rovos wheel requires a hubcentric ring for installation. This ring is included with each wheel.
|Size:||20" x 10"|
Please Note: This Rovos wheel SC0682010511438SGM requires small diameter, tuner style lug nuts (WHLLN7 and WHLLN8). Larger OEM style lug nuts will NOT work.
Available individually, as a staggered set of four wheels or a set with tires.
Like all Rovos wheels, the 20" x 10" Durban wheels are low pressure cast wheels. Low pressure casting uses positive pressure to move the molten aluminum into the mold quicker. This helps improve mechanical properties and achieve a finished product that is denser than a gravity cast wheel. Low pressure casting is the most common process approved for aluminum wheels sold to the OEM market and it offers a good value for the aftermarket as well. Although low pressure casting has a slightly higher production cost over gravity casting, it allows for a higher quality product.
Please Note: The 20" inch x 10" wheel is intended for use on the rear of your Mustang. Wider rear wheels have a deeper concave to enhance the look of a staggered setup.
*Valve stem TPMS compatible. All 2007 and newer Mustangs use tire pressure sensors in each wheel.
*The 20x8.5" Wheels will work with 2013-2014 GT500 6-piston brakes with 15” rotors will fit. However, these Rovos wheels may require a 3-6mm spacer (NOT Included) to clear 2007-2014 Mustangs equipped with 14" 4-Piston Brembos.
*The staggered set of wheels comes with 20" x 8.5" front wheels with a +35mm offset.
One of the easiest ways to get the biggest visual impact from an upgrade to your 2005-2014 Mustang is by adding some new wheels from CJ Pony Parts. If you're are trying stray away from common replica style wheels, add a set of unique Rovos Wheels so your Mustang can be one of a kind. With the addition of matching tires, your Mustang can look and handle amazing in no time!
Order this Rovos SC0682010511438SGM 20" x 10" Satin Gunmetal Durban Wheel for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
From:CJ's Low Price:$365.00
CJ's Low Price:$164.99
CJ's Low Price:$365.00