Door Lock and Ignition Cylinder Set for all 1965-1966 Mustangs.Replace those old, worn out door lock cylinders and that faulty ignition switch cylinder in your 1965 or 1966 Mustang with this new Door Lock and Ignition Cylinder Set! This set includes a pair of matching door lock cylinders, one for the driver side and one for the passenger side, and a new ignition switch cylinder. The set also comes with two matching, standard replacement keys and two door lock cylinder retainers.
- Ignition Switch Cylinder
- Driver Side Door Lock Cylinder with Retainer
- Passenger Side Door Lock Cylinder with Retainer
- Pair of Matching Standard Replacement Keys
Over the years, from constant use, your Mustang's door locks have probably seen better days. These new reproduction door lock cylinders are direct fit replacements for those hard to turn, original door lock cylinders. Each door lock cylinder comes with a new door lock cylinder retainer for installation.
You will no longer have problems with your key catching or fitting properly. With this new ignition switch cylinder, you can trust you'll have a clean turn and ignition every time you turn the key.
When it comes to restoring your classic Mustang, replacing the door locks and ignition switch cylinder is a pretty important step in the process. Over the years, depending on how many owners and the circumstances, there could be numerous identical keys floating around that could be used to access your Mustang. Now is the perfect time to replace those old locks and ignition cylinder with this convenient Door Lock and Ignition Cylinder Set.
*Door lock cylinders and ignition switch cylinder will use the same key.
CJ Pony Parts offers a wide variety of ignition switch, door lock and trunk lock components to get your 1965 or 1966 Mustang back on the road in no time.
Product ReviewsWrite a review
Door Lock And Ignition Cylinder Set 1965-1966 is rated out of 5 by 12.
Rated 5 out of 5 by Diggler from Very Nice Super nice to have working locks and ignition again. My old ignition could be started with a flat-head screw driver. I now feel more secure that I have these installed and it was relatively easy to do. I also purchased the pony keys to keep my original look.
Date published: 2015-02-11
Rated 4 out of 5 by Elissa75 from Easy fit Easy to fit, took 5 minutes. Very happy with the look, would be better if it included the boot & glovebox lock in one kit.
Date published: 2015-02-22
Rated 1 out of 5 by unterseebooten from cheap made! Had a good ignition key, but both doors had been replaced so had no key for them, ordered this, and right off, switching the ignition out, wasn't easy, and the key does not go in/out easy. I've done these before, usually piece of cake. One door lock went in easy and worked well, 2nd and last door, the key stuck and is still in the lock. Pieces of junk. Now ordered the scott drake set.
Date published: 2016-04-10
Rated 4 out of 5 by Dogman from Good product I bought this product and installed it on my 66 mustang. It's got keys now which is great. Minor issues with fit in the bezel. I had to use a dremel to get the ignition cylinder to fit and I has to purchase metric bolts to attach the accessory wire but the installation was really pretty smooth. It's works perfectly!
Date published: 2016-06-16
Rated 5 out of 5 by Dale875 from Ignition and door locks My old ignition switch was worn out so I changed it and the door locks, the only hard part is undoing the clip on the rods to the door locks. It doesn't come with new ones so you have to order them separately or re-use the old ones
Date published: 2016-01-31
Rated 5 out of 5 by jbhaynes from Fit perfectly The original key was very worn and cracked, needed something new quickly. Ordered this set and installed Ignition cylinder right away. Works perfectly. Doors will be next.
Date published: 2015-08-21
Rated 5 out of 5 by Cityfrog from Great value My car had doors replaced years ago. I had three keys for doors and ignition. Had no problems switching out thanks to CJ Pony Parts helpful videos. Way to go.
Date published: 2015-07-28
Rated 5 out of 5 by FernandoHdz from Great product! I'm from Mexico and I'm very glad I found this set. I had no problems with the shipping and it's a high quality product.
Date published: 2015-07-27
can these sets be had with the trunk lock with the doors and ignition?
No, the trunk lock set is a separate part. Look up CJ part # HW1463.
Date published: 2015-09-15
What do you have to do to get the connecting rod disconnected from the lock?
You Might Also Like
CJ's Low Price:$29.66
CJ's Low Price:$40.99
By Bill Tumas: We’re here with a door lock and ignition set, fitting your 1965 through 1966 Mustang. This door lock ignition cylinder set will be a direct replacement for the original parts, found in your 1965 through 1966 Mustang. They include 2 high quality door lock cylinders, with the gaskets and the insulation retainers, along with ignition cylinder and a gasket for that. It's going to use 1 key to open all 3 locks, and comes with a spare, as well. This door lock and ignition set is an excellent choice for your daily driver or for restoration.