Scott Drake Electric Fan and Aluminum Shroud Kit for all 1965-1966 Mustangs with a Scott Drake Aluminum Radiator.
If you are sick and tired of your 1965-1966 Mustang overheating, especially at more lower RPMs or ever when you are idling, then it's time give your Pony some help by picking up this Electric Fan and Aluminum Shroud Kit from Scott Drake. The superior-quality upgrade will not only eliminate those annoying instances of overheating, but also provide a much cooler engine bay to let your vintage Pony get its best performance possible.
- 16" spal 10 straight-blade fan
- Aluminum shroud
- Wiring harness
- Adjustable thermostatic switch
- Powder-coated brackets
Features & Benefits:
- Designed specifically to work with Scott Drake's 259 Series Aluminum 2-Row Radiators
- High-performance fan rated at 1650 CFM
- Strategically-placed flaps at each corner
- Increased air flow and cooling capabilities
- Superior maximum efficiency
- Slight improvement to horsepower and fuel economy
Scott Drake manufactures this kit around a high performance, 16" Spal 10 straight-blade fan that is rated at 1650 CFM. The fan provides a superior-level performance in your classic 1965-1966 Mustang with an amp draw of 11 amps. Combined with the aluminum shroud in this kit, the fan has an overall thickness of 3-1/4". Specifically designed to work with their own 259 series aluminum 2-row radiators, Scott Drake also includes a wiring harness, relay and an adjustable thermostatic switch, which aptly mounts to the shroud with the help of powder-coated brackets.
Scott Drake's Electric Fan and Aluminum Shroud Kit C3DZ-8146/8600A will fit perfectly in your 1965-1966 Mustang's engine bay, so the fan can draw all of the air from the radiator for an upgrade in the cooling capabilities underneath your hood. Scott Drake places pass-through flaps that are strategically designed in each corner to make for an increase in overall air flow for the maximum amount of efficiency. Also, just removing your stock fan reduces the overall rotational mass, which will result in an improvement in your Mustang's horsepower and fuel efficiency.
*This fan will ONLY work with a Scott Drake 259 Series Aluminum 2-Row Radiator 259-2AL-LM, which you can find here at CJ Pony Parts.
Scott Drake has become an iconic brand, redefining quality for reproduction and aftermarket Mustang parts from 1964 to present Mustangs. CJ Pony Parts offers a massive collection of Scott Drake parts that have become so popular that many customers ask for them by name. Once you try their parts on your Mustang, we're sure you will, too.
Order a Scott Drake C3DZ-8146/8600A Electric Fan and Aluminum Shroud Kit for your 1965-1966 Mustang with a Scott Drake Aluminum Radiator from CJ Pony Parts today!
Product ReviewsWrite a review
can installation instructions be found on line prior to purchase
can this fan be installed between the grill and the Scott Drake 3 row radiator to blow in conjunction with the belt driven, factory fan?
You Might Also Like
CJ's Low Price:$349.99
CJ's Low Price:$349.99
CJ's Low Price:$293.95
CJ's Low Price:$289.95
As Scott Drake developed this Fan and Shroud Kit specifically to work with their 2-Row Radiator also available here at CJ Pony Parts. The basis of the set up is going to be this aluminum shroud with this spal 16 inch, 10 blade fan in the middle. The fan is going to flow 1650 CFM. It includes all necessary power wires, relays, as well as an adjusting thermostatic control for installation. The thermostat is going to install into your 2-Row '65 through '66 Scott Drake Radiator, and the control here will allow you to dial in the temperature at which the fan turns on.
While if modifications this fan may be used on other applications, it is designed specifically to work only with the Scott Drake 2-Row Radiator.