Scott Drake Fuel Tank Installation Kit with a 3/8" Fuel Sending Unit for all 1965, 1966, 1967 and 1968 Mustangs.
Make sure your fuel tank, whether brand new or refurbished, is properly mounted on your 1965-1968 Mustang by ordering this Fuel Tank Installation Kit with a 3/8" Fuel Sending Unit from Scott Drake. This kit is easily fitted onto your vintage Pony and will help tighten up your fuel assembly to make for a fantastic purchase for your vintage Pony.
- 3/8" Fuel Tank Sending Unit
- 4" Fuel Tank Filler Hose
- Fuel Tank Mounting Hardware Kit
- Fuel Filler Pipe To Body Cork Gasket
- Set of Fuel Tank Filler Screws
The highlight of this kit from Scott Drake is the 3/8" fuel tank sending unit that will make sure your fuel gauge is reading accurately, so you won't have to worry about randomly getting stuck on the side of the rode. This unit includes a 3/8" hose fitting and a new gasket, it will mount to the fuel tank in your classic Mustang. Scott Drake makes sure that this fuel tank sending unit is properly inspected to make sure you'll have an easier installation. Also included is an o-ring to make sure this unit is correctly sealed.
The fuel filler pipe hose is 4 inches in length and manufactured from a fuel resistant rubber. It is easily installed and will connect the filler pipe to your fuel tank. This is the standard replacement that is used and is incredibly durable within your fuel system. Scott Drake also throws in a fuel filler pipe to body gasket that is made from fuel resistant cork. This is what sits on the end of your filler pipe and meets with your gas cap. Installing this to your fuel assembly will prohibit any fuel spills or water from getting into the trunk area from the filler tube.
This installation kit also comes with the proper hardware that you will need including the mounting hardware for your fuel tank which has eleven cadmium plated sheet metal screws, one black oxide captive washer bolt and a 'J' plate nut. The other pieces of hardware are a set of special sheet metal screws that are used to attach the filler tube to your tail lamp panel.
Tech Tip: If you decide to install two gaskets on your filler pipe, it will be beneficial to move the gas cap away from the tail light panel. Doing this will help keep your gas cap from scratching your Mustang when it's twisted during opening.
Scott Drake has become an iconic brand that redefines quality for reproduction and aftermarket Mustang parts for 1964 to present Mustangs, and has become the standard for OEM quality Mustang parts that offer the best fit, durability and quality. CJ Pony Parts offers more than 1,600 Scott Drake parts that have become so popular that many customers ask for them by name.
Go ahead and purchase this Scott Drake Fuel Tank Installation Kit with a 3/8" Fuel Sending Unit for your 1965, 1966, 1967 or 1968 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
Replaced the fuel tank and sending unit in my 1965 Mustang about eight years ago. Now the sending unit reads empty when there is approximately six to eight gallons of gas in the tank. Should I just replace it or is there a fix?
how many ohms is this sender?
You Might Also Like
CJ's Low Price:$489.99
CJ's Low Price:$45.99
Whether refurbishing your original tank or installing a brand new one, this Scott Drake instillation kit is going to give you the main parts you need for a proper instillation.
It starts off with their fuel sending unit, which replaces the stock piece, and has a 3/8 fitting with much more consistent gauge reading. Includes the necessary O ring for instillation, a fuel filler hose to go to the filler neck, a new gasket for the filler neck, and all the hardware necessary to install the tank.
If you're ordering a new tank for you '65 through '68 Mustang, ordering the Scott Drake instillation kit is going to make your install go a lot easier.