Scott Drake Fuel Tank Installation Kit with a 5/16" Fuel Sending Unit for all 1965, 1966 and 1967 Mustangs.
If you’re refurbishing or purchasing a new fuel tank it’s a great idea to replace your mismatch fuel tank hardware, components and replace it with this high quality Fuel Tank Installation Kit with a 5/16" Fuel Sending Unit C5ZZ-9002-5MIK from Scott Drake. This convenient kit can easily be installed on any 1965-1967 Mustang which will help freshly tighten up your fuel tank assembly.
- 5/16" Fuel Tank Sending Unit
- 4" Fuel Tank Filler Hose
- Fuel Tank Mounting Hardware Kit
- Fuel Filler Pipe To Body Cork Gasket
- Set of Fuel Tank Filler Screws
The star of this kit is a 5/16" fuel tank sending unit from Scott Drake which will make sure your fuel gauge is reading correctly, so you won't have to worry about getting stuck on the side of the road when you least expect it. This fuel sending unit includes a 5/16" hose fitting and a new gasket, it will mount to the fuel tank in your 1965-1967 Mustang. Scott Drake makes sure that this fuel tank sending unit is properly tested to make sure you'll have an easier installation. Also included is an O-ring to make sure the fuel you just purchased doesn’t leak out.
The fuel filler pipe hose is 4 inches in length and manufactured from a fuel resistant rubber. It is easily installed and will connect the filler pipe to your fuel tank. This is the standard replacement that is used and is incredibly durable within your fuel system. Scott Drake also includes a fuel filler pipe to body gasket that is made from cork, which helps protect the exterior paint. Installing this to your fuel assembly will prohibit any fuel spills or water from getting into the trunk area from the filler tube.
Tech Tip: If you decide to install two gaskets on your filler pipe, it will be beneficial to move the gas cap away from the tail light panel. Doing this will help keep your gas cap from damaging your paint when it's twisted on and off your Mustang.
This installation kit from Scott Drake also comes with the proper hardware that you will need including the mounting hardware for your fuel tank which has eleven cadmium plated sheet metal screws, one black oxide captive washer bolt and a 'U' nut. The other pieces of hardware are a set of special sheet metal screws that are used to attach the filler tube to your tail lamp panel.
Scott Drake has become an iconic brand that redefines quality for reproduction and aftermarket Mustang parts for 1965 to present Mustangs, and has become the standard for OEM quality Mustang parts that offer the best fit, durability and quality. Every part is designed to look and function exactly like the original, right down to the tiny details that the manufacturers of standard reproductions tend to ignore.
Purchase a new Scott Drake C5ZZ-9002-5MIK Fuel Tank Installation Kit with a 5/16" Fuel Sending Unit for all 1965, 1966 and 1967 Mustangs from CJ Pony Parts today!
Product ReviewsWrite a review
I just purchased your FT2 16 gal. fuel tank for my 67 mustang will the Scott Drake: C5ZZ-9002-8MIK fit this? When I watched the video I thought this came with the tank I purchased but after opening it and looking a little further at the web page I saw th
You Might Also Like
Regular Price: $54.99
Special Price: $38.49
Regular Price: $262.99
Special Price: $210.39
Regular Price: $270.99
Special Price: $203.24
If you're replacing the fuel tank in your ‘65 through ‘67 Mustang, this kit from Scott Drake is going to provide everything necessary for installation. It's going to include a brand new sending unit with a 516 fitting. A four inch fuel hose, O-ring, all necessary hardware, as well as a new gasket. The installation kit is going to include a single filler pipe gasket. As always, we do recommend using two of these, if you want to pull the gas cap further away from your painted taillight panel, so you don't damage it when removing the cap.
If you're replacing the fuel tank on your 65 through 67 Mustang, it's a great idea to pick of one of the these install kits from Scott Drake.