Set of Scott Drake Electroluminescent Gauge Faces for all 1971, 1972 and 1973 Mustangs with a Tachometer.Have you grown tired of the boring and plain gauge faces that came stock in your 1971-1973 Mustang? Are they just a little too dim and difficult to read at night or in the dark of a tunnel or the woods? Scott Drake has just the answer you've been searching for.
This set of Electroluminescent Gauge Faces from Scott Drake have their own controller for a fully adjustable light intensity range. The wonderful ambient light emitted can also be changed from a soft blue to a mellow, diffused green with the simple push of a button. These panels actually glow, making it easy to see and get a reading from your gauges, even in dimly lit conditions!
This is a set of 7 panels that are each easily installed directly in place of the old, bland factory gauges. This set includes the three gauges in the center dash; the speedometer gauge, the tachometer gauge and the fuel gauge. This Set of Scott Drake Electroluminescent Gauge Faces for all 1971, 1972 and 1973 Mustangs with a Tachometer also includes an oil temperature gauge, an oil level gauge and an amperage levels gauge.
This is an excellent upgrade for anyone looking to add that extra bit of flare to their interior, while at the same time updating their old, dim gauges that needed replaced in their 1971, 1972 or 1973 Mustang.
Similar Mustang PartsMore Mustang Specialty Gauge Faces
I wish I could give this awful product a zero. This is the single worst product I have received from CJ Pony Parts and I will assure you I will never purchase another Scott Drake product ever. First, the replacement gauge faces are not self adhesive. You must glue them down. Second the wiring is poorly done and I had to reconnect 2 separate connectors because the wires were not connected. Third you have to seriously modify your gauge cluster to allow the faces to lay flat I am talking cutting a huge gouge in the plastic with a Dremel. If you don't the face will raise up and stop your needles for RPM and Speed. I finally got the faces glued, the gauge cluster cut, my dash board removed and reinstalled. I had tested the faces before I closed everything up and they were working. So I go for a test run to see how they work and suddenly the speedometer no longer is lighting up. The lousy wiring had bitten me in the ass again. A loose connection at the base of the speedo face was flickering on and off and finally stopped all together. Now I have these POS faces glued to my original gauges and the freaking speedo no longer lights. Thank you for wasting an entire day and ruining my gauges.
You Might Also Like
CJ's Low Price:$104.99
CJ's Low Price:$89.99