Sway Bar Front 1-1/8" Complete Kit Small Block 1967-1970

CJ's Part Number: FSB2B
CJ's Low Price:
$128.95
1454803200 15684
Based on your parts selection you might be interested in the items listed below.
CJ's Low Price:
$133.99
Qty
CJ's Low Price:
$219.99
Qty
Earn 128 RPM Points What's this?
Sway Bar Front 1-1/8" Complete Kit Small Block 1967-1970

Product Description

Front 1-1/8" Complete Sway Bar Kit for 1967, 1968, 1969 and 1970 Mustangs with a Small Block Engine.

Your stock suspension does an adequate job in most situations. Where you may run into a problem is when you need to make a sudden lane change to avoid an accident or when you find that curve in the road is a little sharper than you thought. As your vehicle begins to turn, the body will "roll" transferring weight to the outside wheels. This causes the front end to "plow", or what is technically known as understeer. The result: Your vehicle wants to keep going straight and you're out of control.

With the addition of a set of new anti-sway bars, body roll and understeer will be greatly reduced resulting in a safer, more balanced suspension. This kit features a gloss black finish.

Front Sway Bar Kit Includes:
- Front Sway Bar: 1-1/8" high carbon steel with hot forged ends and cadmium plating
- Bushings: black polyurethane
- Attaching Hardware

*This sway bar Will NOT fit 1967-1970 Big Block Mustangs due to oil filter clearance.

As you drive your Mustang, especially if it is one of the earlier models, body roll can be an issue. While it was equipped with a sway bar that helps reduce body roll, there are better products on the market than the factory sway bar. CJ Pony Parts offers a line of those products, with sway bars for 1965-1973 Mustangs, and some of the highest quality products CJ Pony Parts has to offer.

Purchase a new Front 1-1/8" Complete Sway Bar Kit for 1967, 1968, 1969 and 1970 Mustangs with a Small Block Engine from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Sway Bars  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
1
Sway Bar Front 1-1/8" Complete Kit Small Block 1967-1970 is rated 4.75 out of 5 by 4.
Rated 4 out of 5 by from Brackets don't line up The holes are too far apart for 1967 and 1969 Mustangs. Takes some work to elongate the holes so the bolts can go through.
Date published: 2015-07-25
Rated 5 out of 5 by from very nice easy to install great improvement in handling would definitely recommend. I don't know why I waited so long.
Date published: 2015-04-19
Rated 5 out of 5 by from Great sway bar Every thing fit perfect. Easy to install , it's a no hassle project
Date published: 2015-05-19
Rated 5 out of 5 by from Great Product Big difference when compared to original. Very nice quality!
Date published: 2015-02-04
  • 2016-02-07T08:45CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_FSB2B, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions

1

68 mustang 302, car sways left and right at high speed

Asked by: tropa
This could help solve that problem.
Answered by: CJ Pony Parts
Date published: 2015-04-13
  • 2016-02-07T08:53CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_FSB2B, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like