Pair of 3-Point Retractable Rear Seat Belts with Chrome Lift Latches for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.
Make your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang safer with a pair of all new 3-point retractable rear seat belts featuring chrome lift latches! This pair includes direct-fit rear seat belts for the driver side and passenger side of the rear seat. Similar to the seat belts found in most modern cars of today, these new harnesses will give you added protection by adding a belt that comes down across your torso from over your shoulder and into the buckle where the lap belt connects.
- Sold as a Pair
- Available in Most Early Model Style Colors
- 116" Total Belt Length
- Modern 3-Point Harness Design
- Retractable Belt Holders
- Chrome Lift Latches
- Quick-Lock Safety System
- Includes All Necessary Mounting Hardware and Instructions
- Assembled in the USA
These rear seat belts come with beautiful chrome lift latches and retractable belt holders to keep the shoulder belt out of your seat when entering and exiting the car. The retractable belt holders also have a modern quick-lock safety system that will lock the seat belt in position when the belt is pulled too quickly, like in an accident.
Please Note: The available belt colors are not factory correct. They are intended to be a close match to your Mustang's interior.
Your classic Mustang only came equipped with a lap belt style seat belt, and that was made over 40 years ago. While some may still be in good shape, many others aren't. CJ Pony Parts offers dozens of Mustang seat belts, so you can replace an ailing lap belt with a stylish new one. Order a pair of 1965-1973 Mustang 3-Point Retractable Rear Seat Belts with Chrome Lift Latches from CJ Pony Parts today!
Similar Mustang PartsMore Mustang Parts
Product ReviewsWrite a review
I have a somewhat odd question.. The seatbelt how long is it..? I want to put them in my 65 convertible, where the housing will be mounted in the trunk and the belt will come up behind the backseat so it would loose about 50/60 cm by doing that..
i want retractable seat belts to fit front and rear for my 67 convertible mustang, i think latch type can you advise are the ones listed suitable for the rear of a convertible.
Where does the retractor go in the rear seat area, and how much work does ot need for installing it..? Do I need to drill in the chassis..?
I want to buy the dark red interior kit which belt colour is the closest match? Do you have any photo examples?
Will this work on a 1965 convertible?
Which blue is closest to 1965 interior blue?
will i be able to install these to my seat or do i have to install these to the headliner
You Might Also Like
Seat Belt Retractable 3-Point With Chrome Lift Latch Front Pair Coupe 1965-1967/Convertible 1965-1973From:CJ's Low Price:$189.99
From:CJ's Low Price:$189.99
From:CJ's Low Price:$189.99
CJ's Low Price:$116.99