Pair of 3-Point Retractable Front Seat Belts with Chrome Push Buttons for all 1968, 1969, 1970, 1971, 1972 and 1973 Coupe Mustangs and 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Fastback Mustangs.
Make your 1968-1973 coupe or 1965-1973 fastback Mustang safer with a pair of all new 3-point retractable front seat belts featuring chrome push button buckles! Similar to the seat belts found in most modern cars of today, these new harnesses will give you added protection by adding a belt that comes down across your torso from over your shoulder and into the buckle where the lap belt connects. This pair includes front seat belts and all necessary hardware for the driver side and passenger side front seats.
- Sold as a Pair
- Available in Most Early Model Style Colors
- Modern 3-Point Harness Design
- Retractable Belt Holders with a Quick-Lock Safety System
- Chrome Push Button Buckles
- Plastic Protective Belt Holder Sleeves
- 131" Overall Belt Length
- Assembled in the USA
- Includes All Necessary Mounting Hardware and Instructions
These front seat belts come with handsome chrome push button buckles and retractable belt holders to keep the shoulder belt out of your seat when entering and exiting the car. The retractable belt holders also have a modern quick-lock safety system that will lock the seat belt in position when the belt is pulled too quickly, like in an accident. The female belt buckle portion of each seat belt is equipped with a plastic belt holder sleeve to protect the center console.
This pair of 3-point retractable front seat belts is only intended for use in 1968, 1969, 1970, 1971, 1972 and 1973 coupe Mustangs and 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 fastback Mustangs.
Please Note: The available belt colors are not factory correct. They are intended to be a close match to your Mustang's interior.
Originally, classic Mustangs came equipped with lap belt style seat belts. While these seat belts offer some protection in a collision, after 40 or more years on the road, they might not be in the best of shape. CJ Pony Parts offers dozens of replacement Mustang seat belts, so you can add some stylish new lap belt style Mustang seat belts or upgrade to a new 3-point style seat belt, similar to what is in all new automobiles.
Order a pair of 1968-1973 coupe and 1965-1973 fastback Mustang 3-Point Retractable Front Seat Belts with Chrome Push Buttons from CJ Pony Parts today!
Similar Mustang PartsMore Seat Belts
Product ReviewsWrite a review
Would I need to remove the headliner to install any hardware?
In a /68 fast back, where does the three point harness attach?
Can these seat belts be fitted into a 1973 convertible with the shoulder belt?
My 1968 model, Mustang coupe was built in December 1967. I understand it was not until February, 1968 that shoulder belts were an option. For the various aftermarket shoulder belt kits do I use the 1965-1967 kit or the 1968-1973 kit?
How is the top seat belt mounted and which hole is used, my engineer says I need a 2 inch plate with the nut mounted to it but there is no room for this. Is there a special nut for this
Hi, is the screw for the anchor bolt hole included or which screw do I need to order? Regards, Thomas
Hey, what about the upper bracket will not belt very high over the shoulder, on the other I have seen and you have an extension in the upper bracket so it will be a little lower.
Hi, can you please confirm whether the 131" overall belt length is only the main part of the belt (not including the short latch strap) and is measured from the retractor mechanism to the end of the belt when fully extended? Thanks Mike
You Might Also Like
From:CJ's Low Price:$189.99
From:CJ's Low Price:$189.99
Seat Belt Retractable 3-Point With Chrome Push Button Front Pair Coupe 1965-1967/Convertible 1965-1973From:CJ's Low Price:$189.99