Seat Side Trim Kit with Seat Back Adjusters and Black Seat Hinge Covers for all 1967 Mustangs.After you reupholster your 1967 Mustang's front bucket seats, it's time to replace your old, worn out seat side trim, hinge covers, seat back adjusters and hardware with this Seat Side Trim Kit with Seat Back Adjusters for all 1967 Mustangs. This time and money saving kit comes with everything you need to give your front bucket seats a full overhaul!
- Driver Side Aluminum Seat Side Shield Molding (1)
- Passenger Side Aluminum Seat Side Shield Molding (1)
- Scott Drake Seat Side Shield Mounting Kit (2)
- Pair of Scott Drake Seat Hinge Covers (1)
- Scott Drake Seat Back Adjusting Kit (1)
- Front Seat Pivot Pins (4)
- Seat Hinge Pivot Washers (4)
Let's face it, it's rare to find original seat side shield moldings that aren't dented or scratched because of their location on the lower outside portion of the front seats. These new Aluminum Seat Side Shield Moldings are the final touch to reupholstering your driver side and passenger side front seats. Each seat side shield molding is made from stamped aluminum with a polished finish, and designed to original specifications with accurately placed mounting holes for a direct fit on to your 1967 Mustangs front seats.
An added benefit of this convenient kit, is the addition of a Seat Back Adjusting Kit from Scott Drake. This kit allows you to adjust how far back your front bucket seats can recline. The kit comes with all the necessary components for the driver side and passenger side front bucket seats. It includes a pair of chrome screw adjusters; pair of nuts and washers; pair of heavy-duty plastic rest plates; and 4 attaching screws.
This kit includes 2 Scott Drake Seat Side Shield Mounting Kits to properly mount both of your new seat side shield moldings. A single Scott Drake Seat Side Shield Mounting Kit includes 3 spacers and 3 screws, enough for one seat side shield molding. These kits are necessary to mount the seat side shield molding to the side of the seat back, and to keep a space between the seat side shield molding and the seat upholstery, preventing rips in the soft material.
The Pair of Seat Hinge Covers from Scott Drake are exact reproductions of your original seat hinge covers. Each seat hinge cover is designed to original specifications and made from durable plastic with the correct grain texture. They are available in your choice of Black or a Neutral color, which can be painted to match your 1967 Mustang's interior color. Only one seat hinge cover is required per front bucket seat, and you must reuse your original mounting hardware with these new seat hinge covers.
If you need new Front Seat Pivot Pins, this kit has you covered with a set of 4 for both front bucket seats. These front seat pivot pins are made from steel and designed to factory specifications for a correct fit. The pivot pin holds the seat back frame to the bottom of the seat frame. Each seat requires 2 pivot pins to hold the seat frames together. This kit also includes a total of 4 Seat Hinge Pivot Washers that are necessary to keep the pivot point of the hinge from rubbing against the seat upholstery. Each seat requires 2 fiber washers.
This kit is available with Black or Neutral Seat Hinge Covers.
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
You Might Also Like
From:CJ's Low Price:$355.50