8-Pattern Sequential LED Taillight Kit for 1965 and 1966 Mustangs.There are so many Mustangs with sequential taillights that it can be hard to stand out from the crowd. However, this 8-Pattern Sequential LED Taillight Kit for 1965-1966 Mustangs takes sequential taillights to the next level. Eight user selectable sequential patterns are included in this plug-n-play wiring kit. Switching between the sequential patterns only requires the push of a button.
The factory style connectors plug right into your OEM light bulb socket for simple installation.You can reuse your OEM housings and lenses. The factory taillight housing's waterproof sealing is maintained. This kit is engineered for simple mounting, wiring and operation. All circuitry is self-contained with no separate control module to mount.
Standard Flash Mode and Demonstration Mode:
- Standard Flash Mode - Flashes all LEDs in all panels together with the flasher relay or solid light with brake. Mimics light bulb operation.
- Demonstration Mode - Steps through each sequential pattern cyclically. Flashes each sequence six times before stepping to the next sequence, then repeats.
Over forty bright LEDs (per panel) replace the factory incandescent bulbs. The kit is designed to utilize all available illumination area of the lenses. LEDs are brighter than incandescent lights, last much longer, and run extremely cool. LED voltage is internally regulated assuring constant brightness regardless of vehicle voltage. Input voltage is rated at 11-15 volts. The kit doesn't draw any power when the ignition is off. All mounting hardware is included.
*Requires low current draw flasher module. Sold separately.
Similar Mustang PartsMore Taillights
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$699.99
CJ's Low Price:$699.99
Regular Price: $174.99
Special Price: $148.74
Regular Price: $11.99
Special Price: $9.59
These sequential LED taillights are going to be direct replacements for the factory bulbs found in your 1965-1966 Mustang. They're going to plug into the factory bulb socket, require the addition of one wire running to the front of the car to a 12 volt [source 00:00:29] to operate the programmability. You'll start off with a standard sequence, and then you have 8 additional programmable options to give yourself a real custom look. The 40 LED's going to be ultra bright and be much more effective than a factory bulb.
Here, we're going to show you some of the options for the LED as far as programmability. To change it, there's a button on the back. You simply push it. It gives you 8 different options beyond the original. Option 1, all panels flash at the same time for option 1. Option 2 will be your standard sequencing from basically inboard to outboard. Option 3, the same thing, but then it'll go back to the inboard. Option 4 will go by panels inside to out. It lights up in 3 sections, so it'll fit the 3 sections of the lens. Option 5 will be the same thing, except it's going to go in and then back out. Option 6 will be sequential starting int he center and going outward. 7 will be the same thing, inward to outward but then back in. Option 8's going to be panel sequentially, again, center to out. Again, that 3-panel design there. The last option, which will be option 9 on here, is going to be the same thing with the panels, but it's going to go center to out and then back in.
The programmability adds a very unique feature to these sequential LEDs that'll look great on your '65-'66 Mustang.