Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017

CJ's Part Number: MSK330-V
MSRP: $89.99
From:
CJ's Low Price:
$75.99
1480809600 57791
Depending on what year Mustang you own, it's important to make sure you pick up an adapter or retainer to properly install one of these shift knobs.
Earn 75 RPM Points What's this?
Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017
Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017 Play Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017 Video 1
CJ Shift Knobs

Product Description

Mustang Rally III 2-1/8" Shift Knob with a 6-Speed Shift Pattern and Pony Logo for 2011, 2012, 2013, 2014, 2015, 2016 and 2017 Mustangs with a 6-Speed Manual Transmission.

If you’re looking to switch up the factory shift knob in your 2011-2017 Mustang, this new Mustang Rally III 2-1/8” Shift Knob featuring a 6-speed shift pattern and a Pony logo is just for you! These race-inspired manual shift knobs from CJ Pony Parts are designed with eye-catching colors and Mustang Rally III style stripes in a high-gloss finish that will give your Mustang’s interior the classic, yet custom look that all enthusiasts are after.

Features and Benefits:
- Available in a Variety of Color Options
- Inlaid Rally III Style Stripes with Mustang Script
- Correct 6-Speed Shift Pattern (Reverse to the Left and Up)
- Etched Running Pony Logo
- Manufactured Using Premium Partek Resins
- Engineered for Strength and Durability
- Comfortable 2-1/8" Knob Diameter
- 12mm x 1.25 Thread Pattern
- Made in the USA

What are Mustang Rally III stripes? Mustang Rally III style stripes consist of three separate stripes; two small outer stripes surrounding a wide inner stripe with the word Mustang in late 60's-style script in the middle. These stripes run horizontally on the driver and passenger side of the shift knob to simulate rocker stripes once properly aligned on the shifter handle.

These American-made manual shift knobs are manufactured using the same high-quality partek resins found in world class billiard balls, and are engineered for long-term strength and durability. They feature a comfortable 2-1/8" diameter and the correct 12mm x 1.25 thread pattern for a direct-fit in your EcoBoost, V6, GT or Boss 302 Mustang. Choose from a variety of stripe and color combinations that suit your individual taste. Color options are listed by knob color, then stripe/logo color. The shift pattern, located on top of the knob, is the same color as the stripes and is inlaid, polished smooth to the touch.

Mustang Applications:
- V6 2011-2017
- GT 2011-2017
- Boss 302 2012-2013
- EcoBoost 2015-2017

*All shift knobs are custom made to order and take approximately 3-4 weeks to ship from CJ Pony Parts.
*This shift knob will not fit 2010-2014 Shelby GT500 Mustangs because they require a 10mm x 1.25 thread pattern.

Please Note: This manual shift knob does not include a jam nut. However, a jam nut or threaded shift boot retainer is required for 2011-2014 Mustangs to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended over the jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer, you run the risk of splitting the shift knob in half if you over tighten the knob and it bottoms out on the shift handle.

Please Note: For 2015-2017 Mustangs, the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.

Order a new Mustang Rally III 2-1/8" Shift Knob with a 6-Speed Shift Pattern and Pony Logo for your 2011, 2012, 2013, 2014, 2015, 2016 or 2017 Mustang with a 6-Speed Manual Transmission from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Shifter Knobs  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 129.37ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 210.29ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Pony Logo 6-Speed 2011-2017 Video Transcript
By Bill Tumas: If you're looking for any easy upgrade for the interior of your Mustang, you can't go wrong with an aftermarket shift knob. Here at CJ's we have a huge selection, including these 2 1/8" diameter USA made knobs, available in 13 colors. With or without stripes, with your choice of graphic, there's over a thousand different options available.

You should have no trouble finding one that looks great in your Mustang.

Installation for the shift knob is very easy. If you're early Mustang you'll have to thread on this jam nut. If you're '05 and up, we carry these retainers that will hold your boot in place once you install the after market knob.

All the knobs are available in solid colors, without any graphics whatsoever. If you chose to go with a graphic, we offer the 5.0, the running horse, the snake, the GT, as well as a Boss 302. If you choose to go with a pattern, stripes are available as well. And if you prefer, you can actually have the graphic added to the side.

In our case, we had this custom one made for our CJ race car with our CJ emblem on the side. We'll be installing this one.

Since quarter mile performance has been the goal with our gotta have it race 2013 GT, we're still running the stock shift knob. We'll remove this one and install our new green knob. Get a good grip on the knob and turn it counter clockwise.

First step for the installation of the new knob is to install its retainer. The retainer's gonna hold the boot in place and also work as a jam nut for the knob. Thread your retainer down until it's touching your shift boot. Grab your shift knob, line up the threads. Start threading it on. Now, if you thread it all the way down, it probably isn't gonna line up straight.

What you'll wanna do then is loosen it up until it's about an eighth of a turn from straight, thread the retainer upward. Get a good grip on it, turn it until it's straight. As you can see our shift knob was a nice additional upgrade to our interior. It only took a few minutes to install. You'll be back on the road in no time.