Solid Color 2-1/8" Shift Knob with a 6-Speed Shift Pattern and GT Logos for all 2011, 2012, 2013, 2014, 2015 and 2016 GT Mustangs with a 6-Speed Manual Transmission.
Add some custom style to your 2011-2016 GT Mustang's interior with a new Solid Color 2-1/8" Shift Knob featuring a 6-Speed Shift Pattern and GT Logos from CJ Pony Parts! These manual shift knobs are available in a wide range of color options with the correct, original shift pattern etched on the top of the knob and the GT logo on both sides of the knob. Pattern and logos are etched in white on dark color knobs and black on light colored knobs.
Features and Benefits:
- Available in a Variety of Colors with a High-Gloss Finish
- Correct 6-Speed Shift Pattern (Reverse to the Left and Up)
- Etched GT Logo on the Driver and Passenger Side
- Made Using High Quality Partek Resins
- Engineered for Strength and Durability
- Comfortable 2-1/8” Diameter
- Original 12mm x 1.25 Thread Pattern
- Made in the USA
These American-made manual shift knobs are manufactured using the same high-quality partek resins found in world class billiard balls, and are engineered for long-term strength and durability. They feature a comfortable 2-1/8" diameter and the correct 12mm x 1.25 thread pattern for a direct-fit in your 2011-2016 6-Speed GT Mustang.
*All shift knobs are custom made to order and take approximately 3-4 weeks to ship from CJ Pony Parts.
Please Note: This manual shift knob does not include a jam nut. However, a jam nut or threaded shift boot retainer is required for 2011-2014 Mustangs to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended over the jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer, you run the risk of splitting the shift knob in half if you over tighten the knob and it bottoms out on the shift handle.
Please Note: For 2015-2016 Mustangs, the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.
Order a new Solid Color 2-1/8" Shift Knob with a 6-Speed Shift Pattern and GT Logos for your 2011, 2012, 2013, 2014, 2015 or 2016 GT Mustang with a 6-Speed Manual Transmission from CJ Pony Parts today!
Product ReviewsWrite a review
Can I get this with 5.0 on the sides instead of GT
Can this be special ordered in Black with yellow etching?
You Might Also Like
Regular Price: $19.99
Special Price: $16.99
Shift Knob 2-1/8" Rally With Shift Pattern 6-Speed And GT Logo V6/GT Mustang 2011-2015/Boss 302 2012-2013
Regular Price: $79.99
Special Price: $55.99
Regular Price: $66.99
Special Price: $52.49
You should have no trouble finding one that looks great in your Mustang.
Installation for the shift knob is very easy. If you're early Mustang you'll have to thread on this jam nut. If you're '05 and up, we carry these retainers that will hold your boot in place once you install the after market knob.
All the knobs are available in solid colors, without any graphics whatsoever. If you chose to go with a graphic, we offer the 5.0, the running horse, the snake, the GT, as well as a Boss 302. If you choose to go with a pattern, stripes are available as well. And if you prefer, you can actually have the graphic added to the side.
In our case, we had this custom one made for our CJ race car with our CJ emblem on the side. We'll be installing this one.
Since quarter mile performance has been the goal with our gotta have it race 2013 GT, we're still running the stock shift knob. We'll remove this one and install our new green knob. Get a good grip on the knob and turn it counter clockwise.
First step for the installation of the new knob is to install its retainer. The retainer's gonna hold the boot in place and also work as a jam nut for the knob. Thread your retainer down until it's touching your shift boot. Grab your shift knob, line up the threads. Start threading it on. Now, if you thread it all the way down, it probably isn't gonna line up straight.
What you'll wanna do then is loosen it up until it's about an eighth of a turn from straight, thread the retainer upward. Get a good grip on it, turn it until it's straight. As you can see our shift knob was a nice additional upgrade to our interior. It only took a few minutes to install. You'll be back on the road in no time.