Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004

CJ's Part Number: MSK323-V
MSRP: $89.99
CJ's Low Price:
$79.99
1480636800 58615
This jam nut is essential to completing your shift knob upgrade.
CJ's Low Price:
$2.99
Qty
Earn 79 RPM Points What's this?
Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004
Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004 Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004 Play Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004 Video 1
CJ Shift Knobs

Product Description

Mustang Rally III 2-1/8" Shift Knob with a 6-Speed Shift Pattern and a Cobra Logo for all 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs with a Manual Transmission.

Need to change out that dull shift knob your currently have? Want a more race-inspired look to your 1983-2004 Mustang's interior? Then don't shy away from ordering this all new Mustang Rally III 2-1/8" Shift Knob with a 6-Speed Shift Pattern and a Cobra Logo for that aggressive focal point in your new interior!

Features:
- Available in a Variety of Color Combinations
- Inlaid Rally III Style Stripes
- Mustang Script Inside the Stripes
- Correct 6-Speed Shift Pattern (Reverse to the Right and Up)
- Popular Mustang Cobra Logo Facing Rear of Vehicle
- Manufactured Using Premium Partek Resins
- Engineered for Strength and Durability
- 2-1/8" Knob Diameter
- 12mm x 1.75 Thread Pattern
- Officially Ford Licensed
- Made in the USA

What are rally III style stripes? Rally III stripes consist of three separate stripes: two small outer stripes surrounding a wide inner stripe. These stripes run horizontally on the driver and passenger side of the shift knob to simulate rocker stripes. With this specific knob, classic Mustang script lettering is centered along each rocker stripe. The 6-speed shift pattern is located directly on top of the shift knob, and the Cobra is facing the back of the car once properly aligned. All stripes and logos are inlaid onto the shift knob and are smooth to the touch.

These Ford licensed knobs feature a 2-1/8" diameter and the correct 12mm x 1.75 thread pattern to comfortably fit in your 1983-2004 Mustang. The knobs are very similar to your typical billiard ball, being created using the same high-quality partek resins and are designed for long-term strength and durability.

When purchasing this shift knob, you'll have the option to further customize it by choosing from a variety of bold, high-gloss color combinations for the knob and stripe logos that best fit your personal style. CJ Pony Parts lists these colors by their knob color first, followed by the stripe color. The 6-speed shift pattern & famous Cobra logo are the same color as the Rally III stripes, while the Mustang lettering is the same color of the knob.

*All shift knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.

Please Note: This manual shift knob does not include a jam nut. However, a jam nut is required to make sure the shift knob is properly aligned when tightened on the shift handle. If you do not have an existing jam nut to reuse, CJ Pony Parts has them available (HW3042).Without a jam nut you run the risk of splitting the shift knob in half, if you over-tighten the knob when it bottoms out on the shift handle.

Order a Mustang Rally III 2-1/8" Shift Knob with a 6-Speed Shift Pattern and a Cobra Logo for your 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 Mustang with a Manual Transmission from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Shifter Knobs  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 100ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 100.42ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

Shift Knob 2-1/8" Mustang Rally III With Shift Pattern And Cobra Logo 6-Speed 1983-2004 Video Transcript
By Bill Tumas: If you're looking for any easy upgrade for the interior of your Mustang, you can't go wrong with an aftermarket shift knob. Here at CJ's we have a huge selection, including these 2 1/8" diameter USA made knobs, available in 13 colors. With or without stripes, with your choice of graphic, there's over a thousand different options available.

You should have no trouble finding one that looks great in your Mustang.

Installation for the shift knob is very easy. If you're early Mustang you'll have to thread on this jam nut. If you're '05 and up, we carry these retainers that will hold your boot in place once you install the after market knob.

All the knobs are available in solid colors, without any graphics whatsoever. If you chose to go with a graphic, we offer the 5.0, the running horse, the snake, the GT, as well as a Boss 302. If you choose to go with a pattern, stripes are available as well. And if you prefer, you can actually have the graphic added to the side.

In our case, we had this custom one made for our CJ race car with our CJ emblem on the side. We'll be installing this one.

Since quarter mile performance has been the goal with our gotta have it race 2013 GT, we're still running the stock shift knob. We'll remove this one and install our new green knob. Get a good grip on the knob and turn it counter clockwise.

First step for the installation of the new knob is to install its retainer. The retainer's gonna hold the boot in place and also work as a jam nut for the knob. Thread your retainer down until it's touching your shift boot. Grab your shift knob, line up the threads. Start threading it on. Now, if you thread it all the way down, it probably isn't gonna line up straight.

What you'll wanna do then is loosen it up until it's about an eighth of a turn from straight, thread the retainer upward. Get a good grip on it, turn it until it's straight. As you can see our shift knob was a nice additional upgrade to our interior. It only took a few minutes to install. You'll be back on the road in no time.