Yellow Rally 2-1/8" Shift Knob with a White Ford Racing Logo for 2013, 2014, 2015, 2016 and 2017 Focus STs, 2014, 2015, 2016 and 2017 Fiesta STs and 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 and 2017 Mustangs with a Manual Transmission.
Add some pizzazz to your 2013-2017 Focus ST, 2014-2017 Fiesta ST or 2005-2017 Mustang's interior with a Rally 2-1/8" Shift Knob featuring a Ford Racing logo from CJ Pony Parts! These race inspired manual shift knobs are custom-made in the USA with a multi-color, high gloss finish to provide that classic muscle car look that all enthusiasts are after.
Features and Benefits:
- Available in a Variety of Color Options
- Dual Inlaid Rally-Style Stripes
- Ford Racing Logo Etched On Top of Shift Knob
- Manufactured Using Premium Partek Resins
- Engineered for Strength and Durability
- 2-1/8” Diameter and 12mm x 1.25 Thread Pattern
- Made in the USA
These American-made manual shift knobs are manufactured using the same high-quality partek resins found in billiard balls, and are engineered for long-term strength and durability. Choose from a variety of stripe and color combinations that suit your individual taste. Color options are listed by knob color, then stripe and logo color. The Ford Racing logo on the top of the knob is the same color as the stripes that are inlaid, polished smooth to the touch. The logo divides the two Rally stripes which run vertically around the shift knob.
- V6 2005-2017
- GT 2005-2017
- Bullitt 2008-2009
- Shelby GT500 2007-2009
- Boss 302 2012-2013
- EcoBoost Mustang 2015-2017
- Focus ST 2013-2017
- Fiesta ST 2014-2017
*All shift knobs are custom made to order and take approximately 3-4 weeks to ship from CJ Pony Parts.
*These shift knobs will not fit 2010-2014 Shelby GT500 Mustangs because they require a 10mm x 1.25 thread pattern.
Please Note: These manual shift knobs do not include a jam nut. However, a jam nut or threaded shift boot retainer is required for 2005-2014 Mustangs to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended over the jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer, you run the risk of splitting the shift knob in half if you over tighten the knob and it bottoms out on the shift handle.
Please Note: For the Focus STs, Fiesta STs and 2015-2017 Mustangs, the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.
Order a Rally 2-1/8" Shift Knob with a Ford Racing Logo for your 2013, 2014, 2015, 2016 or 2017 Focus ST, 2014, 2015, 2016 and 2017 Fiesta ST or 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 or 2017 Mustang with a Manual Transmission from CJ Pony Parts today!
This product will fit the following Mustang years:
Product ReviewsWrite a review
You Might Also Like