Solid Color 2-1/8" Shift Knob with a 6-Speed Shift Pattern and Ford Racing Logo for all 2014, 2015 and 2016 Fiesta STs, 2013, 2014, 2015 and 2016 Focus STs, 2011, 2012, 2013 and 2014 V6 and GT 6-Speed Mustangs, 2012-2013 Boss 302 Mustangs, and all 2015, 2016 and 2017 6-Speed Mustangs.
If you’re looking for a way to change up the interior of your 2014-2016 Fiesta ST, 2013-2016 Focus ST, 2011- 2014 6-Speed Mustang, 2012-2013 Boss 302 Mustang or a 2015-2017 Mustang, then you should add the new solid color 2-1/8” manual shift knob featuring a 6-speed shift pattern and Ford Racing logos from CJ Pony Parts!
Features and Benefits:
- Available in an Assortment of Colors
- Correct 6-Speed Shift Pattern (Reverse to the Left and Up)
- Ford Racing Logo Etched On Each Side of Shift Knob
- Made Using Premium Partek Resins
- Engineered for Strength and Durability
- 2-1/8” Diameter and 12mm x 1.25 Thread Pattern
- Made in the USA
These American-made manual shift knobs are manufactured using the same high-quality partek resins found in billiard balls, and are engineered for long-term strength and durability. Choose from a variety of color combinations that suit your individual taste. The shift pattern and Ford Racing logo are etched in white on dark-color knobs and black on light-color knobs.
*All knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.
Please Note: For the 2011-2014 Mustang a jam nut is required with these shift knobs. A jam nut or threaded shift boot retainer is required to make sure the shift knob is properly aligned when tightened on the shift handle. A shift boot retainer is recommended over the jam nut as it will prevent a gap between the new shift knob and the factory boot. Without a jam nut or shift boot retainer you run the risk of splitting the shift knob if you over tighten the shift knob and it bottoms out on the shift handle.
Please Note: For 2014-2016 Fiesta STs, 2013-2016 Focus STs and 2015-2017 Mustangs the use of a shift knob adapter (HW3290 or HW3291) is required with these shift knobs to properly operate the pull-up style reverse lockout function. Without this adapter you will lose the ability to shift into the reverse gear.
Purchase a new Solid Color 2-1/8" Shift Knob with a 6-Speed Shift Pattern and Ford Racing Logo for all 2014-2016 Fiesta STs, 2013-2016 Focus STs, 2011, 2012, 2013 and 2014 V6 and GT 6-Speed Mustangs, 2012-2013 Boss 302 Mustangs, and all 2015-2017 6-Speed Mustangs from CJ Pony Parts today!
Similar Mustang PartsMore Shifter Knobs
Similar Focus PartsMore Shift Knobs
Similar Fiesta PartsMore Shift Knobs
Product ReviewsWrite a review
Would it be possible to get they gray shift know with the black outlining of the logo and gear images?
Will this fit a 2015 ford focus
You Might Also Like
You should have no trouble finding one that looks great in your Mustang.
Installation for the shift knob is very easy. If you're early Mustang you'll have to thread on this jam nut. If you're '05 and up, we carry these retainers that will hold your boot in place once you install the after market knob.
All the knobs are available in solid colors, without any graphics whatsoever. If you chose to go with a graphic, we offer the 5.0, the running horse, the snake, the GT, as well as a Boss 302. If you choose to go with a pattern, stripes are available as well. And if you prefer, you can actually have the graphic added to the side.
In our case, we had this custom one made for our CJ race car with our CJ emblem on the side. We'll be installing this one.
Since quarter mile performance has been the goal with our gotta have it race 2013 GT, we're still running the stock shift knob. We'll remove this one and install our new green knob. Get a good grip on the knob and turn it counter clockwise.
First step for the installation of the new knob is to install its retainer. The retainer's gonna hold the boot in place and also work as a jam nut for the knob. Thread your retainer down until it's touching your shift boot. Grab your shift knob, line up the threads. Start threading it on. Now, if you thread it all the way down, it probably isn't gonna line up straight.
What you'll wanna do then is loosen it up until it's about an eighth of a turn from straight, thread the retainer upward. Get a good grip on it, turn it until it's straight. As you can see our shift knob was a nice additional upgrade to our interior. It only took a few minutes to install. You'll be back on the road in no time.