White 2-1/8" Shift Knob with a Black 4-Speed Shift Pattern and 50 Years Logo for all 1965, 1966, 1967, 1968 and 1969 Mustangs with a Manual Transmission.
Create a customized focal point inside your classic interior by picking up this White 2-1/8" Shift Knob with a Black 4-Speed Shift Pattern and 50 Years Logo for your 1965-1969 Mustang. Exclusive to CJ Pony Parts, this shift knob will make for more comfortable shifting, while adding an aggressive way to celebrate a significant milestone for an American icon.
- Manufactured Using Premium Partek Resins
- White Finish with Black Pattern & Logos
- 2-1/8” Diameter
- Correct 1/2"-20 Thread Pattern
- 4-Speed Shift Pattern on Top (Reverse to the Left and Down)
- 50 Years Logo on Each Side
- Engineered for Strength & Durability
- Direct-Fit Replacement
- Made In The USA
- Officially Ford Licensed
This shift knob is a direct fit replacement and comes customized with a white high-gloss finish with a black 4-speed shift pattern & logos. The correct 4-speed shift pattern is etched on the top of the shift knob. The highly desired 50 Years logo in inlaid on both the drive & passenger side of the knob and is polished smooth to the touch. Officially Ford licensed, the knobs are crafted with premium partek resins, similar to your typical billiard ball. Complete made in the USA, they will also provide more strength & durability for long-term use in your classic Mustang.
These shift knobs also feature a comfortable 2-1/8" diameter and the correct 1/2"-20 thread pattern to fit in 1965-1969 Mustang.
*All knobs are custom made to order and take 3-4 weeks to ship from CJs.
Please Note: This shift knob does not include a jam nut. However, a jam nut is required to make sure that the shift knob is properly aligned when installed onto the shift handle. Without a jam nut you run the risk of splitting the shift knob if you over tighten the shift knob and it bottoms out on the shift handle.
Don’t delay, purchase this White 2-1/8" Shift Knob with a Black 4-Speed Shift Pattern and 50 Years Logo for your 1965, 1966, 1967, 1968 or 1969 Mustang with a Manual Transmission from CJ Pony Parts today!
Product ReviewsWrite a review
Do you have mustang 50 year logo shift knobs for t5 gear box?
You Might Also Like
CJ's Low Price:$29.25
CJ's Low Price:$18.99
You should have no trouble finding one that looks great in your Mustang.
Installation for the shift knob is very easy. If you're early Mustang you'll have to thread on this jam nut. If you're '05 and up, we carry these retainers that will hold your boot in place once you install the after market knob.
All the knobs are available in solid colors, without any graphics whatsoever. If you chose to go with a graphic, we offer the 5.0, the running horse, the snake, the GT, as well as a Boss 302. If you choose to go with a pattern, stripes are available as well. And if you prefer, you can actually have the graphic added to the side.
In our case, we had this custom one made for our CJ race car with our CJ emblem on the side. We'll be installing this one.
Since quarter mile performance has been the goal with our gotta have it race 2013 GT, we're still running the stock shift knob. We'll remove this one and install our new green knob. Get a good grip on the knob and turn it counter clockwise.
First step for the installation of the new knob is to install its retainer. The retainer's gonna hold the boot in place and also work as a jam nut for the knob. Thread your retainer down until it's touching your shift boot. Grab your shift knob, line up the threads. Start threading it on. Now, if you thread it all the way down, it probably isn't gonna line up straight.
What you'll wanna do then is loosen it up until it's about an eighth of a turn from straight, thread the retainer upward. Get a good grip on it, turn it until it's straight. As you can see our shift knob was a nice additional upgrade to our interior. It only took a few minutes to install. You'll be back on the road in no time.