Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed V6/GT 2011-2014/Boss 302 2012-2013

CJ's Part Number: MSK408W
CJ's Low Price:
$84.99
1480723200 59730
Make sure you properly install your new shift knob with this jam nut!
CJ's Low Price:
$3.99
Qty
Earn 84 RPM Points What's this?
Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed V6/GT 2011-2014/Boss 302 2012-2013
Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed V6/GT 2011-2014/Boss 302 2012-2013 Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed V6/GT 2011-2014/Boss 302 2012-2013 Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed V6/GT 2011-2014/Boss 302 2012-2013 Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed V6/GT 2011-2014/Boss 302 2012-2013 Play Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed V6/GT 2011-2014/Boss 302 2012-2013 Video 1
CJ Shift Knobs

Product Description

White 2-1/8" Shift Knob with a Black 6-Speed Shift Pattern and 50 Years Logo for all 2011, 2012, 2013 and 2014 V6 and GT Mustangs and 2012-2013 Boss 302 Mustangs with a Manual Transmission.

If you are looking to add some custom styling to your 2011-2014 Mustang's interior, look no further than this White 2-1/8" Shift Knob with a Black 6-Speed Shift Pattern and 50 Years Logo. Exclusive to CJ Pony Parts, this knob will create an aggressive, yet smooth focal point to your interior, while celebrating an important milestone for an American icon.

Features:
- High-Gloss White Finish with Black Shift Pattern & Logos
- Correct 6-Speed Shift Pattern on Top (Reverse to the Left and Up)
- 50 Years Logo on Each Side
- Direct OE Replacement
- 2-1/8" Knob Diameter
- 12mm x 1.25 Thread Pattern
- Crafted Using Premium Partek Resins
- Designed for Strength & Durability
- Made In The USA
- Officially Ford Licensed

This Ford licensed shift knob is a direct fit replacement that comes customized in white with a black shift pattern and logos. The correct 6-speed shift pattern is located on top of the knob, while a 50 years logo is located on each of the driver and passenger sides of the knob. The pattern & logos are inlaid onto the knob and polished smooth to the touch. 100% Made in the USA, this shift knob is crafted from the highest-quality partek resins available and is designed for more long-term strength and durability.

This customized shift knob has a 2-1/8" diameter and the proper 12mm x 1.25 thread pattern to comfortably fit into your 2011-2014 V6 or GT 6-Speed Mustang or 2012-2013 Boss 302 Mustang.

*All knobs are custom made to order and take 3-4 weeks to ship from CJ Pony Parts.

Please Note: This shift knob does not include a jam nut. However, a jam nut is required to make sure that the shift knob is properly aligned when installed onto the shift handle. Without a jam nut you run the risk of splitting the shift knob if you over tighten the shift knob and it bottoms out on the shift handle.

*A shift boot retainer is recommended as it will prevent a gap between the new shift knob and the factory boot.

Order a White 2-1/8" Shift Knob with a Black 6-Speed Shift Pattern and 50 Years Logo for your 2011, 2012, 2013 or 2014 V6 or GT Mustang or 2012-2013 Boss 302 Mustang with a Manual Transmission from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Mustang Parts  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 200.09ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 142.18ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

Shift Knob 2-1/8" White With Black Shift Pattern And 50 Years Logo 6-Speed V6/GT 2011-2014/Boss 302 2012-2013 Video Transcript
By Bill Tumas: If you're looking for any easy upgrade for the interior of your Mustang, you can't go wrong with an aftermarket shift knob. Here at CJ's we have a huge selection, including these 2 1/8" diameter USA made knobs, available in 13 colors. With or without stripes, with your choice of graphic, there's over a thousand different options available.

You should have no trouble finding one that looks great in your Mustang.

Installation for the shift knob is very easy. If you're early Mustang you'll have to thread on this jam nut. If you're '05 and up, we carry these retainers that will hold your boot in place once you install the after market knob.

All the knobs are available in solid colors, without any graphics whatsoever. If you chose to go with a graphic, we offer the 5.0, the running horse, the snake, the GT, as well as a Boss 302. If you choose to go with a pattern, stripes are available as well. And if you prefer, you can actually have the graphic added to the side.

In our case, we had this custom one made for our CJ race car with our CJ emblem on the side. We'll be installing this one.

Since quarter mile performance has been the goal with our gotta have it race 2013 GT, we're still running the stock shift knob. We'll remove this one and install our new green knob. Get a good grip on the knob and turn it counter clockwise.

First step for the installation of the new knob is to install its retainer. The retainer's gonna hold the boot in place and also work as a jam nut for the knob. Thread your retainer down until it's touching your shift boot. Grab your shift knob, line up the threads. Start threading it on. Now, if you thread it all the way down, it probably isn't gonna line up straight.

What you'll wanna do then is loosen it up until it's about an eighth of a turn from straight, thread the retainer upward. Get a good grip on it, turn it until it's straight. As you can see our shift knob was a nice additional upgrade to our interior. It only took a few minutes to install. You'll be back on the road in no time.