Rebuilt Shifter for 1965-1967 Small Block Mustangs with a 4-Speed Toploader Transmission.This shifter is completely rebuilt both cosmetically and mechanically and is ready to install in your 4-speed toploader Mustang.
Product ReviewsWrite a review
Shifter Rebuilt Toploader 4-Speed Small Block 1965-1967 is rated out of 5 by 2.
Rated 4 out of 5 by Lesly67 from Works Bought this for a 67 289. Works well, tolerance is a bit tight on the bolt for the dogs but over all workable. Not really a lot of options out there for a four speed, considering that it's rebuilt it looks to be well done and there is an added spring on the side that mine didn't have, so hopefully it's an improvement.
Date published: 2016-05-17
Rated 4 out of 5 by RJ52 from Shift linkage Very well made product! It works great and is high quality
Date published: 2016-03-28
Will this part fit a 69 transmission?
Date published: 2016-03-09
I was looking at the rebuilt shifter for a 4 speed toploader transmission. From the diagram of the rebuilt shifter it is hard to tell if this is all I need to have a "floor shifter" for my '65 Must. It looks like the linkages etc, but where is the stick?
Here is the link for the shifter lever, http://www.cjponyparts.com/shifter-lever-4-speed-1965-1967/p/MSL1/
Date published: 2016-03-07
Hello, does the rebuilt shifter unit fit my Mustang GT 1965 / 289 with BW / T10 Transmission ? and do you charge also core deposit ? thank you for your response, Peter (Switzerland)
This won't fit a T10. We need full payment at time of order, either via credit card or PayPal.
Date published: 2015-08-07