Pair of Silverhorse Racing Flush Mount Quarter Window Louvers for all 2010, 2011, 2012, 2013 and 2014 Mustangs.These flush-mount quarter window louvers from Silverhorse Racing fit your Mustang perfectly and are the ONLY ones available that are designed for an OEM-style flush-mount and fit. Once you remove the factory quarter windows you can then install these louvers, fitting them snugly in place flush in line with the outside body line of your Mustang.
SilverHorse Racing uses laser-scanned factory glass for a perfect seal and fit, and modeled the piece with over 500,000 data points! These are the same louvers found stock on the 2010 FR500CJ Cobra Jet Ford Mustang. These louvers make great style accents while simultaneously still functioning as tinted quarter windows you can see out of.
- Dark Tinted Polycarbonate
- Flush Mount
- UV Protection
- Driver Side and Passenger Side Louvers
Made from dark-tinted polycarbonate (transparent plastic) to the same thickness as the OE Mustang glass, these pieces have UV inhibitors in the material for an extended, trouble free life. The use of tinted polycarbonate allows for SilverHorse Racing's pieces to have the most visibility from the driver's seat of any Mustang louver on the market. This pair comes sold as a driver side quarter window louver and a passenger side quarter window louver.
This pair of Silverhorse Racing Flush-Mount Quarter Window Louvers for all 2010, 2011, 2012, 2013 and 2014 Mustangs are available unpainted or painted in any of the factory correct 2010-2014 Mustang exterior paint colors. The unpainted version will require painting, after normal surface preparation has been performed, before installation.
*Removal of factory Mustang quarter window glass is required.
*Requires use of window glass removal tool kit, WRTK.
*Will not fit convertible Mustangs.
*Pre-painted louvers normally take 2-4 weeks for delivery.
Similar Mustang PartsMore Mustang Quarter Window Scoops & Louvers
I got mine prepainted. Color was spot on and flawless. I can't tell you how nice these look, the flush look is unique and looks awesome. Some of the other stick on louvers, to me, are ugly. I have countless people asking me about this mod. It actually increases the driver side vision, the tint from the factory window isn't there, so you can actually see better with these while backing up. Installation is a process, a couple of hours, and a dremel sander is pretty helpful to do some final trimming of the panels. I was reluctant to do this mod because of trimming the interior panels, but after the fact, it looks great and you can't tell you trimmed the panels. It' costs a bit more, but man is it worth it, just looks freakin awesome!
Shipping did take about 3 weeks. Product is an exact match for color (sterling gray). I installed them myself. It definitely is in your best interest to buy the window removal kit with adhesive - about $40. The instructions provided are pretty spot on. The only thing I found was that after trimming the interior panels, trial fit the louvers for even spacing around its edges and the car. I found that I had to use a dremel with a sanding disk to trim excess material off the panels for a proper fit. Best advice - reinstall the panels after you've removed your old window, trial fit the louvers, and then trim whatever if any material to get a good fit. The dremel can be used from the outside of the car without damaging any surfaces while trimming any excess material. Apply the adhesive and tape it for a few hours to hold it firm and keep from shifting while it dries. Looks great and already got my first compliment on the look. Yes you pay a bit more for this look, but it's unique and the flush look is awesome.
these look very nice in the box -- have not found anyone locally that will install them. Not sure that the paint matches 100% from looking at them, but not sure, since they aren't on the car, yet.
Shipping took too long - 3 weeks.
Shipping took too long - 3 weeks.
You Might Also Like
From:CJ's Low Price:$169.99
CJ's Low Price:$480.99
CJ's Low Price:$49.99