SSBC Brake Fluid Distribution Block for 1965-1966 Mustangs with Disc Brakes.This all new replacement distribution block is made from brass, right here in the USA. The distribution block mounts to the inner fender near the master cylinder. The distribution block allows the brake fluid to be carried between the front and rear brakes.
Product ReviewsWrite a review
SSBC Brake Fluid Distribution Block Disc Brakes 1965-1966 is rated out of 5 by 1.
Rated 4 out of 5 by Bob 65 going on 75 from it fits neatly along side of the power booster it worked out great and you don't even know it there.
Date published: 2016-01-29
On the 65 distribution block do you have a diagram as to where each line hooks up on the block?
The front port is the inlet from the master cylinder, the rear port goes to the right front, the bottom port goes to the left port.
Date published: 2016-06-06
I have a 65 Mustang with drum brakes as stock. I bought disc brakes for the front and the proportioning valve but the stock distribution block has some chips out of the area where the brake line flange seals so I need a stock distribution block.
This should be what you are looking for, http://www.cjponyparts.com/ssbc-brake-fluid-distribution-block-disc-brakes-1965-1966/p/2B075A/
Date published: 2016-02-29
I see this says for disc brakes, is there some sort of proportioning valve built into this? Why is it disc brake specific?
this does not have a proportioning valve. however the lines are different sizes with different routing between the disc and drum systems so this part will not interchange between the two.
Date published: 2016-01-26
Do ya'll offer a distribution block for a drum/drum 66'? (Base model V8 coupe)
Check out CJ part # BCV2-V, which may work.
Date published: 2015-10-18