Starkey Footwell Lighting Kit LED White 2005-2014

Starkey: 3440W
CJ's Low Price:
$64.99
1481241600 66702
Earn 64 RPM Points What's this?
Starkey Footwell Lighting Kit LED White 2005-2014
Starkey Footwell Lighting Kit LED White 2005-2014 Play Starkey Footwell Lighting Kit LED White 2005-2014 Video 1
Starkey

Product Description

Starkey White LED Footwell Lighting Kit for all 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 and 2014 Mustangs.

Looking for a unique addition to your 2005-2014 Mustang's interior? Stand out from the rest by adding this all-new LED Footwell Lighting Kit from Starkey. Available in multiple color options, this kit provides you with everything you'll need to easily adding LED lighting to your Mustang's footwell, creating a sleek, custom style.

Kit Includes:
- Pair of LED Lamps
- Adhesive Backed Mounting Channel
- Full Wiring Harness
- Detailed Instruction Manual

Features & Benefits:
- Pre-Wired Assembly
- Provides Sleek Look
- Illuminates when Door Opens and Fades Automatically
- Incased in Diffused Silicone Housing
- Specifically Engineered for S197 Mustang's Electrical System
- Available in Red, White and Blue LED Color Options
- Quick & Painless Install

Starkey's footwell lighting kit is a pre-wired assembly that features a full wiring harness along with a pair of compact, yet powerful LED lamps, giving you one for your driver and passenger side. Unlike other LED lighting, these lamps are incased within a diffused silicone housing to ensure an even dispersing of the lights for a more clean, sleek look. The lights will illuminate as you open your Mustang's doors and the fade off automatically when you fire the engine or lock your doors.

This pre-wired assembly has been specifically engineered to work with your S197's electrical system for more of an OEM feel. The whole assembly will easily mount into place, installing in less than an hour with no drilling or special mounting necessary. Each lamp will mount into place using 3M Very High Bond adhesive tape along with Starkey's provides adhesion promotor to ensure the lamps will remain secure.

*Installing this kit in Convertible Mustangs will require the use of a Torx T20 bit/driver.

Please Note: Although this lighting kit can be installed in premium trim cars that have the "My Color" option, they will NOT integrate into the existing system and can't be controlled with the built-in selectable options that control the factory color changing feature.

With the kits from Starkey Products, lighting projects are easier than ever, with plug and play wiring and simple housing installation. CJ Pony Parts has many lighting options from Starkey Products, so find that perfect look or upgrade and make your order today!

What are you waiting for? Order this Starkey LED Footwell Lighting Kit for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 or 2014 Mustang from CJ Pony Parts today!

 

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.27ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 95.43ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like

Product Video

Starkey Footwell Lighting Kit LED White 2005-2014 Video Transcript
By Bill Tumas: If you're looking for a great way to brighten up your interior and add a nice custom look, LEDs are a great way to do so. I have here a Starkey LED Footwell Lighting Kit fitting all 2005-2014 Mustangs which will give off a nice bright light. Today we're going to show you how to install it using this 2006 Mustang GT.

This Footwell LED Lighting Kit is designed to work with your factory dome light and has an LED for the driver's side and passenger's side footwell area and is available in white, red and blue. Today we're going to be installing the white kit in our Mustang.

This LED footwell kit is going to hook up right to your dome light wiring harness. In order to do that, we need to loosen up this kick panel, and then pull the A pillar trim off. Loosen up the kick panel first. You don't need to remove it, just loosen it up a little bit, then you can remove the A pillar. Start at the back of this A pillar cover, pop it loose, and work your way forward.

After removing the A pillar trim, there's a hole now in the dash where we can run the wiring. We're going to drop these LEDs through to run it down here, and just to make it a little easier, I'm going to put some electrical tape around this light just so it runs a little bit easier and doesn't fan out and get caught on anything. Now we're going to run this through down to the floor. You're going to pull this entire harness through, but leave this part hanging out. You can take off the electrical tape.

Since we're going to be tapping into some wires, it's a good idea to disconnect the battery before doing so. We're going to be tapping into LED wires into this harness with battery disconnected, disconnect this connector, and pull back the electrical tape to gain access to the wires. The first wire we're going to be tapping into is this black wire with the blue stripe. It's pin number 6 on this connector. This is only for the 2005-2009 Mustangs. If you're doing a 2010-2014 Mustang, it's the grey and purple wire, pin number 3. We're going to be using the supplied wire taps through this. Take the wiretap and slide the wire in between the 2 teeth like so. Close the wiretap, and grab yourself a pair of pliers, and squeeze it until you hear a snap. Just like that.

The last wire that we're going to tap into is this green wire with a yellow stripe. It's pin number 7 on this connector. If you're doing this on a 2010-2014, you're going to be connecting to the black wire with a yellow stripe on pin number 11. It's the same process here. Use the supplied wiretap. Get the wire in between the teeth like so. Close it. Use your pliers again, and squeeze with your pliers until you hear a click.

Now we're going to take this red wire from the LED kit and plug it into the black wire with a blue stripe. Now take the black wire from the LED kit and plug it into the green wire. Now before moving on with the installation, we're going to make sure that the LEDs are working properly. We're going to reconnect this connector and plug in the battery and make sure the lights work. To test these, it's very simply. All you have to do is open up the door, and they're working so we can move ahead with the installation.

Take the LED that's at the end of the harness and run it through this hole behind the center console. Now leaving the LEDs on might help you with this process. Pull it through the other side. You can mount this LED anywhere you would like. There's enough wire with this kit to where you can put it basically anywhere in this area, however, we're just going to put it right here right under the steering wheel.

To clean this surface, we're using this supplied alcohol wipe. This will help it stick better, and we're going to use this adhesion promoter that was supplied with the kit. Peel off the back to the tape. Now mount the LED. Do the same thing on the other side. Now on the passenger side, we're going to mount this LED right here. Now Starkey supplies a bunch of zip ties to where you can hide this harness and get it out of the way. We're going to go ahead and do that, but we're not going to bore you with showing it.

With our wiring cleaned up, we can reinstall the A pillar. Reconnect the kick panel, and your installation's finished. This Starkey Footwell LED kit looks great, and it really brightened up our interior. Installation is very easy, and the only tool you might need is a pair of pliers to crimp the wiretap. Installation should take maybe an hour, and before you know it you'll be heading down the road.