Steeda Short Throw Shifter Tri-Ax T5/T45 1983-2004

Steeda: 555-7353
MSRP: $189.95
CJ's Low Price:
1448496000 25215
Top off your new shifter with a cool shift knob.

Regular Price: $77.99

Special Price: $54.59

Earn 179 RPM Points What's this?
Steeda Short Throw Shifter Tri-Ax T5/T45 1983-2004
Steeda Short Throw Shifter Tri-Ax T5/T45 1983-2004 Play Steeda Short Throw Shifter Tri-Ax T5/T45 1983-2004 Video 1 Play Steeda Short Throw Shifter Tri-Ax T5/T45 1983-2004 Video 2

Product Description

Steeda Tri-Ax Short Throw Shifter for all 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs with a T5 or T45 Transmission.

Equip your 1983-2004 Mustang with the smoothest, most comfortable, quickest shifting and shortest throw shifter on the market by ordering this all-new Tri-Ax Short Throw Shifter from Steeda. Steeda's Tri-Ax shifter offers one of the shortest throws around along with the most comfortable hand position. The height is adjustable with two different positions to cater to your reach.

Do you have problems hitting third gear? With the Tri-Ax you can say good-bye to missed shifts thanks to offset-preload coil springs that help you find third gear. Over extending the shift lever can result in costly transmission damage so the Tri-Ax uses adjustable positive stops.

Features & Benefits:
- Compact Design
- CNC Machined from Billet 6061 T-6 Aluminum
- Heavy Duty Construction
- Nickel Plated Pivot Shaft
- Tri-Ax Shift Handle Included
- Offset Preload Coil Springs
- Exclusive BootGuard to Protect Inner Boot from Damage
- Creates Smooth & Precise Shifts
- Increased Comfort Level
- Adjustable Height in Two Positions
- Prevents Over-Extending Shift Lever
- Avoids any Future Rusting or Stains
- Easy to Install
- Includes Grade 8 & Stainless Steel Hardware
- Made in the USA

The shifter is made from CNC machined 6061 T-6 billet aluminum. Heavy duty, solid construction means there are no welds, stampings or castings to break. Nickel plating on the pivot shaft prevents rusting and staining. All hardware used is grade 8 and stainless steel. The short throw shifter is topped with Steeda's exclusive Tri-Ax shift handle.

A pivot ball and lever are constructed from one piece of billet steel with a design that produces greater stiffness for front-to-back motion than competing round shafts. Upgraded rear mounting bushings further reduce deflection under hard shifting. This heavy duty construction and use of fewer parts means an overall stronger product. The Steeda Tri-Ax Short Throw Shifter accepts factory shift knobs, Steeda shift knobs, and many other aftermarket shift knobs with the factory thread pattern.

Steeda Tri-Ax shifters are manufactured right here in the USA under strict ISO 9001-2008 Standards. Steeda's design details carry a US patent making the Tri-Ax one of the most innovate shifters on the market. Exclusive features like the two-position handle height and calibrated internal spring tensions ensure you never miss a gear. Install a Steeda Tri-Ax Short Throw Shifter in your Mustang and start shifting like a pro!

Mustang Fitments:
- 1983-2001 Mustangs with a V8 engine (See note)
- 1994-2004 Mustangs with a V6 engine
- 1987-1993 Mustangs with a 4-cylinder engine

Please Note: In 2001, Ford made the Mustang GT available with two different transmissions. To find out which style transmission you have, check the data sticker located on the driver side door jamb. A "K" means the car came with a TR3650 and a "6" indicates a T45. This shifter works with the T45 or T5 transmission.

Most Mustang parts manufacturers are unable to cover your part needs on a bumper-to-bumper basis. Steeda is a Mustang parts manufacturer that offers everything you need for your vintage or newer Mustang model. The extensive list of Steeda parts includes everything from exhaust kits and radiators to wheels and interior dress up parts. CJ Pony Parts offers a huge selection of Steeda parts to meet your specific performance and styling needs!

Purchase Steeda's Tri-Ax Short Throw Shifter for your 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 or 2004 Mustang with a T5 or T45 Transmission from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Shifters  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Steeda Short Throw Shifter Tri-Ax T5/T45 1983-2004 is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Nice I'm Glad I got this shifter Thanks CJ pony parts. Danny
Date published: 2015-02-09
Rated 5 out of 5 by from Still works great after all these years. I have had a Steeda Tri-Ax in my 1993 for about 14 years now and it was one of the first mods I did. I have never had any issues with it. I prefer the handle that Steeda provides to some of the other brands that are shorter, which makes it harder to reach 3rd and 5th gear.
Date published: 2015-08-11
  • 2015-11-26T08:41CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_MS01, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions


is it springloaded for third gear

Asked by: maxi
It has offset-preload coil springs that help you find third gear.
Answered by: CJ Pony Parts
Date published: 2015-06-17

What kind of transmisión  has the mustang v-6 2000

Asked by: Beaver
Most likely you have a T45.
Answered by: CJ Pony Parts
Date published: 2015-06-16

Will this shifter give me a smooth shift rather than the stock shifter that has a catch before each gear?

Asked by: YLOPONY
Yes, it will be a MUCH smoother and quicker shift than the factory unit.
Answered by: CJ Pony Parts
Date published: 2015-06-11

Do you have these steeda tri ax shifters in stock for a 97 cobra mustang ?

Asked by: cobraman97
Check the stock status, right below the add to cart button. It's updated in real time, so you can see the up to the minute info. Anything I tell you could be out of date seconds after I post it.
Answered by: CJ Pony Parts
Date published: 2015-03-30
  • 2015-11-26T08:56CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_MS01, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like

Product Video

Steeda Short Throw Shifter Tri-Ax T5/T45 1983-2004 Video Transcript
By Bill Tumas: The Short Throw Shifter is still one of the most popular modifications people do to their late-model Mustang, and with good reason. Shorter throws mean quicker shift, means faster acceleration, making the car a lot more fun to drive. In most cases, the after market shifter also has built-in safety devices to lengthen the life of your transmission.

Today we continue with the theme of basic bolt-ons in our 2003 GT by installing this short throw shifter from Steeda. The Steeda Tri-Ax Shifter is one of the most popular aftermarket shifters for your late model Mustang.

First of all, you can see the construction of it. Heavy-duty built, really a high-quality shifter. Has built-in stops, which puts less strain on your shifter forks. These three different adjustments points here allow you to choose the height of your shift handle. It includes an aluminum handle, an isolator to keep down vibration, and all necessary installation hardware. For this installation, you'll need a quarter-inch ratchet, 8mm socket, 10mm socket, 13mm socket, 6-inch extension, two half-inch wrenches, gasket scraper or razor blade, and a mallet.

The Steeda Tri-Ax is going to fit your T5, T45 or T3650 transmission. In the case of a 1994-2004, the installation is going to be exactly the same. You have 1993 or older Mustang, you'll have to take the console apart to get to the shifter. The actual shifter install is going to be identical.

We'll start by twisting off the shifter knob. You're going to reach your hand underneath the edges here, pull straight up to release the shifter boot. Make sure you unplug the lighter. Now we'll get the factory shift handle out of the way. It's held on by two 10mm bolts.

Now we're at the lower boot, which is held on by four 8mm bolts. Once the bolts are out, you can remove the boot. Kind of have to turn it a little bit to get it around the console.

Now you can see your stock shifter. It's held onto your transmission by four bolts, one on each corner. Now remove those next. Once you get the bolts out, you can remove the shifter from your transmission. There is factory silicone sealant used to hold it together, so it may not come apart easily. You may have to use a hammer, a couple small taps usually gets it out. Try it without the hammer first, some times you get lucky.

On your T5 and T45 cars, there's a little cup that sometimes will come out with the shifter, sometimes it stays in the transmission. You will want to make sure that's there and put it back in the transmission. The 3650, they actually attach this now to the ball in the shifter. Get a good grip on it and just pop it off.

Now move it over and install it on our Steeda. Before we install the new Steeda shifter, you want to go across this surface here. Using a gasket scraper or a razor blade, make sure all the old material is scraped off. Once you have it scraped clean, put down a layer of new silicone for our new shifter.

Now you put the Steeda down in place. You install the supplied bolts by Steeda. Do not re-use the factory ones; they will not fit with the new Steeda shifter.

Now we're going to adjust the stops on our shifter. What you want to do is push the clutch in, push your shifter right into third gear. What you do then is loosen this up here, while putting pressure forward. Basically unthread it until it touches the shifter. Once it's touching, you want to go about 1/4 of a turn away from it. Leaving a very thin gap between the shifter and the arm. Then we'll hold it and tight down the lock nut. Now you want to pull it back into second gear, and do the same thing.

Now we're ready to start putting everything back together. You want to start with the boot guard. This little washer that's included, just slide it over the lever and go all the way down at the bottom. Don't worry if it sounds like it's going to rattle around. When you put the lower shift boot on top of it, it will hold it in place and protect the boot.

Now you can reinstall the factory hardware. Now we can install the handle. The handle has two locations you can install it. Because the owner of this car is kind of on the taller side, we're going to go with the higher location.

Now we can reinstall the upper boot. Don't forget to plug your cigarette lighter back in. Lastly, reinstall the knob. Your installation is finished.

Even in the taller setting, the throws are nice and short. Best of all, when it goes into gear now, there's a real solid feel. Those stops do a great job of protecting your transmission against further damage. Installation will take you about an hour. You'll be back on the road in no time.