Steeda Suspension Kit with Pro-Action Struts and Shocks and Sport Springs for 2005, 2006, 2007, 2008, 2009 and 2010 GT Mustangs.When lowering your 2005-2010 Mustang, you should maximize suspension performance by pairing springs with suitable struts and shocks. Steeda decided to create their own suspension kit to save you time and effort when deciding what suspension setup to purchase. The kit includes Steeda Sport Springs and Pro-Action Struts and Shocks. From a performance standpoint, Steeda Pro-Action struts and shocks are far superior to the factory at properly controlling the higher spring rates of Steeda lowering springs. Ride quality and control are improved when your suspension components are matched. Made in the USA!
Steeda Pro-Action fixed valve struts and shocks are a great cost effective alternative to adjustable shocks and struts. Equip your Mustang with Pro-Action dampers for both street and track action. The struts and shocks were engineered by Steeda and manufactured to provide the ultimate in ride quality and handling. Both OE standards for durability and build quality are exceeded meaning these high quality dampers are sure to provide the performance you need. Steeda Pro-Action shocks are manufactured under the following rigorous manufacturing certifications: ISO/TS16949, QS-9000 and ISO 9001.
Lowering your vehicle are Steeda Sport Springs. The S197 Mustang sits high in the rear and this set of springs will give your Mustang a more aggressive look by lowering the front by approximately 1" and the rear by 1-1/4". Experience a big improvement in handling and noticeable reduction in nosedive with the installation of Sport Springs. The increase in handling is accompanied by a ride only slightly stiffer than stock. All Steeda springs are engineered in-house and custom made to Steeda's specifications. Steeda springs were developed in conjunction with Ford Motor Company engineers through our SEMA technology transfer program. Steeda Springs are manufactured under the following rigorous manufacturing certifications: QS-9000 and ISO 9001.
Product ReviewsWrite a review
Do I have to use a new, adjustable panhard bar when installing these?
Yes, I would recommend that you pick up an adjustable panhard bar as well. I say that because whenever you lower your car, you will be changing the position of the rear axle and where it sits perpendicular to the transmission. An adjustable panhard bar will allow you adjust for that difference and make it square with the transmission; within OE specifications.
Date published: 2015-01-08
You Might Also Like
CJ's Low Price:$924.99
CJ's Low Price:$649.99
CJ's Low Price:$914.99
CJ's Low Price:$1,649.99