Supreme Front Steering and Suspension Kit Power Steering 1967

CJ's Part Number: SUSK6
MSRP: $814.72
CJ's Low Price:
1443916800 31612
Earn 778 RPM Points What's this?
Supreme Front Steering and Suspension Kit Power Steering 1967
Supreme Front Steering and Suspension Kit Power Steering 1967 Play Supreme Front Steering and Suspension Kit Power Steering 1967 Video 1

Product Description

Supreme Front Steering and Suspension Kit for 1967 Mustangs with Power Steering.

We offer the most complete front steering and suspension kit for you Mustang. Replace all those worn out rusty parts with this kit featuring direct replacement parts. Your Mustang will feel like a brand new car after the installation of our kit.

Kit Includes:
- Two upper control arms
- Two lower control arms
- Two shock tower bumpers
- Two coil spring saddles
- Two coil spring insulators
- Two coil springs
- Front sway bar with bushings
- Two front sway bar end links
- Two inner tie rods
- Two outer tie rods
- Two tie rod sleeves
- Idler arm
- Strut rod bushing kit

*Will NOT fit big block applications.

Similar Mustang Parts

similar Mustang parts More Suspension Kits  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Supreme Front Steering and Suspension Kit Power Steering 1967 is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from This kit is the way to go I bought this kit and had it installed a month ago on my 1967 Mustang with a 289. Bad upper ball joints made my car fail inspection and it was dangerous to drive at highway speeds. Instead of replacing just the upper ball joints I opted for this kit and replaced everything. I'm glad I did, as the car handles ten times better. My only regret is the parts are Asian (China and Taiwan). I realize domestic parts would cost more but since the Mustang is an All-American car I just wish the kit had U.S. made parts. But that being said this is a good kit, offering value and quality.
Date published: 2015-05-26
  • 2015-10-04T10:45CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_SUSK6, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions


Auto shop installed the supreme front steering and suspension kit on my 1967 Merc Cougar. XR7. Did the disk break kits, front and rear. Now It stops , but it rides like a tank! Banging and rattling on every bump and tar snake. Did we miss something?

Asked by: rjg91048
  • 2015-10-04T10:50CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_SUSK6, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like

Product Video

Supreme Front Steering and Suspension Kit Power Steering 1967 Video Transcript
By Bill Tumas: We're here with our Supreme Suspension and Steering Kit for '65 thorough '66 V8 Mustangs with manual steering. We offer similar kits for all '65 through '73 Mustangs, covering six-cylinder small block, big block, as well as manual and power steering options. Our kits include everything to replace the wear parts in your steering and suspension, including coil springs, coil spring insulators, upper control arms, inner and outer tie rods, lower control arms, coil spring saddles, idler arm, strut rod bushing kit, shock tower bumpers, and a one inch sway bar kit, complete with bushings and end links.

This '65 Mustang being restored by CJ Pony Service has our steering and suspension kit already installed. We put it up on the rotisserie to give you a better idea of where the components go.

The coil spring insulator goes between the top of your coil spring and the top of the shock tower. The saddle attaches the spring to your upper control arm. The upper is attached to the chassis and then attached to your lower control arm via your spindle. Your strut rod is going to go from your lower control arm out to your strut rod bracket with the bushing mounted on the end piece here. Your sway bar attaches to your lower control arm and then also attaches to your chassis.

The kit includes greasable outer and inner tie rod ends, as well as a new idler arm assembly. Our steering and suspension kit is a great way freshen your warn out suspension. With the exception of the spindle, the strut rod, this tie rod end sleeve, your center link, and your pitman arm, everything else is included. With the exception of the spindle, all of the other pieces are available separately if needed.