Supreme Front Steering and Suspension Kit 8 Cylinder Manual Steering 1965-1966

CJ's Part Number: SUSK3
MSRP: $763.64

Regular Price: $709.99

Special Price: $567.99

1418947200 31599
Earn 709 RPM Points What's this?
1418947200 1420070400
On Sale: End of Year Blowout!
SUSK3 Play Supreme Front Steering and Suspension Kit 8 Cylinder Manual Steering 1965-1966 Video 1

Product Description

Supreme Front Steering and Suspension Kit for 1965-1966 Mustangs with an 8 Cylinder Engine and Manual Steering.

We offer the most complete front steering and suspension kit for you Mustang. Replace all those worn out rusty parts with this kit featuring direct replacement parts. Your Mustang will feel like a brand new car after the installation of our kit.

Kit Includes:
- Two upper control arms
- Two lower control arms
- Two shock tower bumpers
- Two coil spring saddles
- Two coil spring insulators
- Two coil springs
- Front sway bar with bushings
- Two front sway bar end links
- Two inner tie rods
- Two outer tie rods
- Two tie rod sleeves
- Idler arm
- Strut rod bushing kit

Similar Mustang Parts

similar mustang parts More Mustang Suspension Kits  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
as advertised
This front suspension kit has worked just as advertised. I installed it in a couple of days in my home garage with out air tools or anything fancy except a spring compressor. The hard part was getting the old parts out of the car. After that the installation took only a few hours. After an alignment at a local shop, the steering is much tighter and more controlled than before. The only hitch in this whole project came more from CJ Pony as the parts took a while to get to me and some came a week or so after the others. When doing this kind of project it does not help to get the strut rod bushings a week after the rest of the suspension parts. I just waited on everything and did it all at once.
Jay Pierce October 12, 2014
1 Results

Product Video

By Bill Tumas: We're here with our Supreme Suspension and Steering Kit for '65 thorough '66 V8 Mustangs with manual steering. We offer similar kits for all '65 through '73 Mustangs, covering six-cylinder small block, big block, as well as manual and power steering options. Our kits include everything to replace the wear parts in your steering and suspension, including coil springs, coil spring insulators, upper control arms, inner and outer tie rods, lower control arms, coil spring saddles, idler arm, strut rod bushing kit, shock tower bumpers, and a one inch sway bar kit, complete with bushings and end links.

This '65 Mustang being restored by CJ Pony Service has our steering and suspension kit already installed. We put it up on the rotisserie to give you a better idea of where the components go.

The coil spring insulator goes between the top of your coil spring and the top of the shock tower. The saddle attaches the spring to your upper control arm. The upper is attached to the chassis and then attached to your lower control arm via your spindle. Your strut rod is going to go from your lower control arm out to your strut rod bracket with the bushing mounted on the end piece here. Your sway bar attaches to your lower control arm and then also attaches to your chassis.

The kit includes greasable outer and inner tie rod ends, as well as a new idler arm assembly. Our steering and suspension kit is a great way freshen your warn out suspension. With the exception of the spindle, the strut rod, this tie rod end sleeve, your center link, and your pitman arm, everything else is included. With the exception of the spindle, all of the other pieces are available separately if needed.