Strut Tower Cap Cover Kit Billet 2005-2010

CJ's Part Number: HW2148-V
MSRP: $107.99
CJ's Low Price:
1455408000 42094
Earn 102 RPM Points What's this?
Strut Tower Cap Cover Kit Billet 2005-2010
Strut Tower Cap Cover Kit Billet 2005-2010 Play Strut Tower Cap Cover Kit Billet 2005-2010 Video 1

Product Description

Billet Strut Tower Cap Cover Kit for all 2005, 2006, 2007, 2008, 2009 and 2010 Mustangs.

This 10-piece Billet Strut Tower Cap Cover Kit seals the top of both struts and the nuts surrounding them on both sides of any 2005, 2006, 2007, 2008, 2009 or 2010 Mustang. These covers are precisely made from 6061 billet aluminum for a snug fit and feature a stylish finish, available in either Satin or Polished.

The kit includes eight smaller strut bolt caps and two larger center caps for the struts.

So whether you need to cover the ugly, factory strut tower bolts and nuts, or are looking to improve the overall appearance underneath the hood, look no further than this 10-piece Billet Strut Tower Cap Cover Kit for your 2005-2010 Mustang.

*Does not work with strut tower braces.

Tech Tip: In 2010 Ford started putting strut tower braces on from the factory. The strut tower braces attach to the car using the 2 inner studs on the strut mounts. To make sure that the inner studs still had enough thread engagement for the strut mount nuts when combined with a strut tower brace Ford started using taller studs. The taller studs will not allow the nut covers to thread down low enough on the studs to sit flush, they will leave a 1/8" gap to the top of the shock tower.

Similar Mustang Parts

similar Mustang parts More Shock Tower Covers  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review

Product Questions


Fit 2007 gt500 Super Snake? Military Discount?   Thanks

Asked by: Jackcoz
Depends if your 2007 GT500 has a strut tower brace or not. If so, this part most likely won't work. Contact our sales team directly to inquire about a military discount...1-800-888-6473
Answered by: CJ Pony Parts
Date published: 2015-04-23
  • 2016-02-14T09:03CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_HW2148-V, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like

Product Video

Strut Tower Cap Cover Kit Billet 2005-2010 Video Transcript
By Bill Tumas: We're here with a billet strut tower cap kit fitting all 2005 through 2010 Mustangs. This 10-piece billet strut nut kit comes in a satin finish, and is designed to fit your 2005 through 2010 Mustang. All five pieces are going to thread onto the factory strut nut and strut mounting hardware. The strut cap kit will fit all factory struts and most aftermarket struts as well, but it will not work with a strut tower brace.