Sway Bar Front 1-1/8" Complete Kit 1965-1966

CJ's Part Number: FSB4
CJ's Low Price:
$157.99
1474848000 15686
Freshen up the front end of your Mustang with the items listed below.
CJ's Low Price:
$65.80
Qty
Earn 157 RPM Points What's this?
Sway Bar Front 1-1/8" Complete Kit 1965-1966

Product Description

Front 1" Sway Bar Kit with Urethane Bushings and Grommets for all 1965-1966 Mustangs.

Your stock suspension does an adequate job in most situations. Where are some situations you may run into when you need to make a sudden lane change to avoid an accident or when you find that curve in the road is a little sharper than you thought. As your 1965-1966 Mustang begins to turn, the body will "roll" transferring weight to the outside wheels. This causes the front end to "plow", or what is technically known as understeer.

Front Sway Bar Kit Includes:
- Front sway Bar: 1-1/8" high carbon steel, hardened and stress relieved
- Brackets: die-formed, 12 gauge zinc chromate plated
- Bushings: double bevel, thermoset urethane
- Attaching Hardware
- Installation Instructions

*This bar is an original factory type replacement which mounts in the factory location and is a larger diameter than the original factory bar.

The sway bar kit includes hardware that consists of heat treated 5,000 lb. end-link bolts, zinc chromate coated brackets, double beveled urethane bushings and plated and cupped washers. You can reduce under steering, body roll and altogether sloppy handling, by adding rigidity with this great new anti-sway bar kit. This ensures long life in your bushings and hardware and a sharp performance of your 1965-1966 Mustang's handling and steering.

Does your 1965-1973 Mustang suspension need some work to make the ride smoother and your Mustang more responsive? CJ Pony Parts has several hundred Mustang suspension parts, including shocks, sway bars, springs and control arms, so you can easily find any suspension component you need. These suspension components can help you fix a problem or give your classic Mustang a much-needed upgrade, so it rides and handles like new.

Purchase a new Front 1" Sway Bar Kit with Urethane Bushings and Grommets for your 1965 or 1966 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Sway Bars  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Sway Bar Front 1-1/8" Complete Kit 1965-1966 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Prefect fit, much heavier than expected. Thick strong steel. Vast improvement over the stock bar. Took away a lot negative roll in curves.
Date published: 2015-12-12
  • 2016-09-26T08:11CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_FSB4, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 5.91ms
  • REVIEWS, PRODUCT

Product Questions

will my 6 cylinider sway bar work with my v8 conversion

Asked by: reds 65
You should upgrade the sway bar to the v8 size or larger to compensate for the extra weight.
Answered by: rk cjpp
Date published: 2016-07-01

Does it come with all the hardware. I do not see the bolts and nuts for the sway bar bushing brackets in the picture.? Also does it come with instructions?

Asked by: RayTada
This does not come with the hardware for the frame brackets. It does not come with instructions, it is a very simple install.
Answered by: rk cjpp
Date published: 2016-06-14
  • 2016-09-26T08:27CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_FSB4, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 7.29ms
  • QUESTIONS, PRODUCT

You Might Also Like