Tie Rod End Outer 1967-1969

CJ's Part Number: ES360R
CJ's Low Price:
1455321600 12808
When you purchase this outer tie rod end you might be interested in the items listed below.
CJ's Low Price:
CJ's Low Price:
Earn 25 RPM Points What's this?
1455494400 1456704000
On Sale: Up to 30% Off Sale!
Tie Rod End Outer 1967-1969
Tie Rod End Outer 1967-1969 Tie Rod End Outer 1967-1969 Play Tie Rod End Outer 1967-1969 Video 1

Product Description

Outer Tie Rod End for all 1967, 1968 and 1969 Mustangs.

Over the years the steering components on your 1967-1969 Mustang tend to get worn out, this could cause excessive play in the steering. This reproduction outer tie rod end is a direct replacement for your worn out original tie rod end. The outer tie rod end can be installed on either the driver or passenger side of your 1967-1969 Mustang. The outer tie rod end threads into the sleeve and connects to the inner tie rod end.

- Fits 1967-1969 Mustangs
- Fits Either Driver or Passenger Side
- OEM Style Replacement
- Grease able Tie Rod

Please Note: This outer tie rod end is sold individually, two are required per Mustang.

The reproduction outer tie rod end includes everything necessary for an easy installation. The tapered ball stud gets mounted on the spindle and gets held on by the castle nut supplied with this outer tie rod end. A grease fitting gets installed on the bottom of the outer tie rod end this helps keep the tie rod end lubricated and easy to maintain over the years.

- Outer Tie Rod End
- Castle Nut
- Dust Boot
- Cotter Pin
- Grease Fitting

*This outer tie rod end will Not work on 1969 Boss 302 Mustangs

Mustang steering difficulties aren't too out of the ordinary, especially for classic Mustangs, which have steering systems approaching 50 years old. CJ Pony Parts offers hundreds of Mustang steering parts, so owners can replace broken steering parts with new, or upgrade their steering. Order today and make an investment towards making your 1967-1969 Mustang much easier to drive.

Purchase a new Outer Tie Rod End for your 1967, 1968 or 1969 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Tie Rods  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Tie Rod End Outer 1967-1969 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Steering straight again Bought this as my car just wasn't straight, after this and some other items the car drives like new.. Great part
Date published: 2015-03-17
  • 2016-02-12T09:09CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_ES360R, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions


hi could you please tell me the sizes at the top and bottom of the taper thanks

Asked by: yue930
  • 2016-02-13T08:57CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_ES360R, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like

Product Video

Tie Rod End Outer 1967-1969 Video Transcript
By Bill Tumas: We’re here with a replacement outer tire rod end fitting your 1967 through 1969 Mustang. If you're going to upgrade your steering or have issues with your front steering, many times the tire iron rod ends are worn out and have to be replaced. The outer tire rod end attaches to the inner tire rod end via the tire rod end sleeve and If there is excessive play in the tire rod end, it can cause issues with steering. This would be a direct replacement. It will fit either the driver or passenger side of your 1967 through 1969 Mustang. It's going to include the castle washer, grease-fitting dust boot and the cotter pin. These outer tire rod ends are so individually. Your Mustang will require two.