TMI Bright White Carbon Fiber Style Vinyl One-Piece Molded Headliner Kit for 1965-1966 Coupe Mustangs.Every classic car restorer knows that original headliner is rare to find in good condition. So, when you're restoring your Mustang's interior, remember the headliner is just as important as the seat upholstery, and now you can replace the original, damaged headliner and upgrade to TMI's sleek and custom looking Carbon Fiber Style Vinyl One-Piece Molded Headliner Kit!
- Carbon Fiber Style Vinyl Covered One-Piece Molded Headliner
- Pair of Carbon Fiber Style Vinyl Covered Molded A-Pillar Panels
- Pair of Carbon Fiber Style Vinyl Covered Molded Sail Panels
TMI's seamless One-Piece Molded Headliners are closely contoured to the interior roofline and are covered in carbon fiber style vinyl with an infused under layer of high density foam for a factory look and finish. Without this foam cushion, the vinyl by itself would show every lump, bump and imperfection for all to see. The small layer of foam helps the vinyl to lay smoothly over the natural irregularities for a professional appearance.
Installing a standard replacement headliner can be quite a chore, as it requires a good bit of dis-assembly, a time consuming installation, then reassembly of a large portion of your Mustang's interior. TMI's all new molded headliner is designed to fit directly into your 1965 or 1966 coupe without any adhesives or hardware. Installation should now only take an afternoon, as the headliner is securely fastened with the existing trim pieces and windlace already in your Mustang. There is no longer a need to remove window glass like original headliner. The new headliner also adds more than one inch of headroom, due to a better fit and the removal of the bows and brackets that held the previous headliner in.
TMI's Carbon Fiber Style Vinyl One-Piece Molded Headliner Kits are available in Black, Bright White, Charcoal, Racy Blue, and Red.
Please Note: These carbon fiber style color options from TMI are not factory correct interior colors, so it is best to purchase all matching TMI carbon fiber style vinyl components, to complete the refreshed, stylish interior of your 1965 or 1966 coupe Mustang.
Product ReviewsWrite a review
TMI Headliner Kit Molded One-Piece Carbon Fiber Style Vinyl Bright White Coupe 1965-1966 is rated out of 5 by 1.
Rated 5 out of 5 by efurtz from Incredible option for a Mustang headliner. This product makes installing a headliner simple enough for the amateur and can actually be installed without assistance of another person. All I did was clamp each side as shown and then place a 2 by 6 vertically close to center as I slipped the front edge into the windshield rubber seal. Rear was even easier. Looks ASTOUNDING!
Date published: 2015-05-07
You Might Also Like
CJ's Low Price:$344.99
CJ's Low Price:$89.99
From:CJ's Low Price:$65.77