TMI Black Vinyl One-Piece Molded Headliner Kit for all 1967-1968 Coupe Mustangs.Every classic car restorer knows that original headliner is rare to find in good condition. So, when you're restoring your Mustang's interior, remember the headliner is just as important as the seat upholstery, and now you can replace the original, damaged headliner and upgrade to TMI's Vinyl One-Piece Molded Headliner Kit!
- Vinyl Covered One-Piece Molded Headliner
- Pair of Vinyl Covered Molded A-Pillar Panels
- Pair of Vinyl Covered Molded Sail Panels
TMI's seamless One-Piece Molded Headliners for 1967-1968 coupes are closely contoured to the interior roofline and are covered in Sierra Grain Vinyl with an infused under layer of high density foam for a factory look and finish. Without this foam cushion, the original style vinyl by itself would show every lump, bump and imperfection for all to see. The small layer of foam helps the vinyl to lay smoothly over the natural irregularities for a professional appearance.
Installing a standard replacement headliner can be quite a chore, as it requires a good bit of dis-assembly, a time consuming installation, then reassembly of a large portion of your Mustang's interior. TMI's all new molded headliner is designed to fit directly into your 1967 or 1968 coupe without any adhesives or hardware. Installation should now only take an afternoon, as the headliner is securely fastened with the existing trim pieces and windlace already in your Mustang. There is no longer a need to remove window glass like original headliner. The new headliner also adds more than 1 inch of headroom, due to a better fit and the removal of the bows and brackets that held the previous headliner in.
TMI's Vinyl One-Piece Molded Headliner Kits are available in factory correct colors to fit-in with any interior.
Please Note: White is not bright white, it is an egg shell off-white color like original.
Product ReviewsWrite a review
TMI Headliner Kit Molded One-Piece Vinyl Black Coupe 1967-1968 is rated out of 5 by 1.
Rated 4 out of 5 by Troy1967 from Pricey, but worth it I was in dire need of some additional headroom after upgrading to the Procar Rally seats, and this headliner was just what I needed. It fits to the contour of the roof perfectly and tucks neatly under the windshield and back glass weatherstripping. My glass was already out of the car, which made the installation less cumbersome. Only complaint I have is that some of the holes for the dome light were misaligned, and this made it a real problem to get the light installed correctly. Also, getting the windlace back on, which holds the sail panels and A-pillar panels in place, was a nightmare, as the fiberglass of the headliner is so thick that the windlace has to be spread apart almost to the point of uselessness in order to make it seat over the lip and hold everything in place. Expect trouble especially around the corners and wherever two panels overlap. Otherwise, great product and looks amazing!
Date published: 2015-10-22
You Might Also Like