TMI Saddle Vinyl One-Piece Molded Headliner Kit for all 1967-1968 Coupe Mustangs.Every classic car restorer knows that original headliner is rare to find in good condition. So, when you're restoring your Mustang's interior, remember the headliner is just as important as the seat upholstery, and now you can replace the original, damaged headliner and upgrade to TMI's Vinyl One-Piece Molded Headliner Kit!
- Vinyl Covered One-Piece Molded Headliner
- Pair of Vinyl Covered Molded A-Pillar Panels
- Pair of Vinyl Covered Molded Sail Panels
TMI's seamless One-Piece Molded Headliners for 1967-1968 coupes are closely contoured to the interior roofline and are covered in Sierra Grain Vinyl with an infused under layer of high density foam for a factory look and finish. Without this foam cushion, the original style vinyl by itself would show every lump, bump and imperfection for all to see. The small layer of foam helps the vinyl to lay smoothly over the natural irregularities for a professional appearance.
Installing a standard replacement headliner can be quite a chore, as it requires a good bit of dis-assembly, a time consuming installation, then reassembly of a large portion of your Mustang's interior. TMI's all new molded headliner is designed to fit directly into your 1967 or 1968 coupe without any adhesives or hardware. Installation should now only take an afternoon, as the headliner is securely fastened with the existing trim pieces and windlace already in your Mustang. There is no longer a need to remove window glass like original headliner. The new headliner also adds more than 1 inch of headroom, due to a better fit and the removal of the bows and brackets that held the previous headliner in.
TMI's Vinyl One-Piece Molded Headliner Kits are available in factory correct colors to fit-in with any interior.
Please Note: White is not bright white, it is an egg shell off-white color like original.
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$331.81
CJ's Low Price:$306.06
From:CJ's Low Price:$306.06