TMI Vinyl One-Piece Molded Headliner Kit for all 1965-1966 Fastback Mustangs.If your Mustang’s interior is in need of some love and attention, the headliner is just as important as the seat upholstery and original headliners still in good condition are hard to find anywhere. Now you can replace that original, damaged or missing headliner and upgrade to TMI’s Vinyl One-Piece Molded Headliner Kit for all 1965-1966 Fastback Mustangs!
Installing a replacement headliner can be quite taxing. It requires a good amount of deconstruction and a time consuming installation and reassembly of a large portion of your Mustang's interior. TMI's all new molded headliner is designed to fit directly into your 1965-1966 Fastback Mustang without any adhesives or hardware. This TMI Vinyl One-Piece Molded Headliner Kit for all 1965-1966 Fastback Mustangs is contoured to the interior so there is no longer a need to remove window glass, like the installation of the original headliner required. Installation should now only take a few hours, as the headliner is securely fastened with the existing trim pieces and windlace already in your Mustang. The new headliner also adds more than 1 inch of headroom, due to a better, tight fit and the removal of the bows and brackets that held the previous headliner in.
- Vinyl Covered One-Piece Molded Headliner
- Available in a Variety of Factory Correct Colors
- Pair of Vinyl Covered Molded A-Pillar Panels
- Pair of Vinyl Covered Molded B-Pillar Panels
TMI's seamless One-Piece Molded Headliners are contoured snugly to the interior roofline and feature a Sierra Grain Vinyl that has an infused under side layer of high density foam for a factory appearance and finish. This layer of foam helps the vinyl to lay smoothly over natural irregularities and creates the clean, professional look you love. Without this foam cushion, the original style vinyl alone would show every lump and imperfection.
So if you are looking to replace the headliner in your 1965-1966 Fastback Mustang and you want to do it with some modern style and updated materials, TMI has you covered with these Vinyl One-Piece Molded Headliner Kits. TMI's seamless One-Piece Molded Headliners are closely contoured to the interior roofline and are beautifully covered in high-quality Sierra Grain Vinyl! This installation will help give your Mustang a more updated and fresh look, while managing to feel like the original materials are still there.
*White is not bright white, it is an egg shell off-white color like original.
Similar Mustang PartsMore Mustang Headliners
TMI needs to have just a little more material for installing; the amount of material for securing hardly allows the headliner to be held in place . Give just a little more for ease of securing and let the installer trim any excess. It does look good but I hope it stays; keeping my headliner wires just in case.
You Might Also Like
From:CJ's Low Price:$230.77