TMI Medium Blue Vinyl One-Piece Molded Headliner Kit for all 1967-1968 Fastback Mustangs.If your Mustang’s interior is in need of some love and attention, the fixing the headliner is just as important as the seat upholstery and the rest of the inside. Original headliners that are still in good condition are very hard to find, but now you can replace the original damaged or missing headliner and upgrade to TMI’s Vinyl One-Piece Molded Headliner Kit for all 1967-1968 Fastback Mustangs!
Typically, installing a replacement headliner can be a tedious and quite taxing project. It requires significant disassembly and a lengthy reconstruction and installation of a large portion of your Mustang's interior. TMI's all new molded headliner is designed to fit directly into your 1967-1968 Fastback Mustang without any adhesives or hardware. This TMI Vinyl One-Piece Molded Headliner Kit for all 1967-1968 Fastback Mustangs is tightly contoured to the interior so there is no longer a need to remove the window glass like the installation or replacing of the original headliner required. Installation should now only take a short afternoon, as this headliner is securely fastened with the existing trim pieces and windlace already in your Mustang. The new headliner also adds more than 1 inch of headroom, due to a better, tight fit and the removal of the bows and brackets that held the previous headliner in.
- Available in a Variety of Factory Correct Colors
- Vinyl Covered One-Piece Molded Headliner
- Pair of Vinyl Covered Molded A-Pillar Panels
- Pair of Vinyl Covered Molded B-Pillar Panels
TMI's seamless One-Piece Molded Headliner Kit for all 1967-1968 Fastback Mustangs are contoured snugly to the interior roofline and feature a Sierra Grain Vinyl that has an infused bottom layer of high density foam providing a factory appearance and finish. This layer of foam helps the vinyl to lay smoothly over any natural irregularities or bumps and creates a clean, professional look. Every lump and imperfection would bulge out and be an eye sore without this added padding.
So if you are looking to replace the headliner in your 1967-1968 Fastback Mustang and you want to do it with some updated materials, classic style and ease of modern installation, TMI has you covered with these Vinyl One-Piece Molded Headliner Kits. TMI's seamless One-Piece Molded Headliners are closely contoured to the interior roofline and are beautifully covered in high-quality Sierra Grain Vinyl! This installation will help give your Mustang a more updated and fresh look, while maintaining the feel and aura of the original 1967-1968 Fastback Mustang.
*The White color option is not a bright white, it is an egg shell, off-white color like the original.
Similar Mustang PartsMore Mustang Headliners
You Might Also Like
Regular Price: $329.99
Special Price $247.49
TMI Center Console with Chrome Trim Full Length Deluxe Without Air Conditioning Coupe/Fastback 1967-1968
Regular Price: $449.99
Special Price $382.49
From:CJ's Low Price:$319.77
Regular Price: $299.99
Special Price $224.99