Pair of TMI Light Parchment 1967 Correct Sport Series Headrests for 1965, 1966 and 1967 Mustangs with TMI Sport or Sport II Series Seats.
If you're putting new TMI Sport or Sport II Series Seats in your vintage 1965-1967 Mustang, then chances are you're going to need some new headrests too. Headrests offer more than just a comfortable place to rest your head. They can also help keep you and your passengers safer as you're cruising down the road! So be sure to check out this Pair of TMI Sport Series Headrests when you're restoring the seats in your classic Pony.
Features & Benefits:
- Made of Premium Vinyl
- Perfectly Matches TMI Sport Series and Sport II Series Upholstery
- Adjustable Four-Position Ratchet for Comfort
- Bolt-On Installation: No Cutting or Welding Necessary
- Available in a Variety of Factory-Correct Colors
- Sold as a Pair: One for the Driver Side and One for the Passenger Side
This Pair of TMI Sport Series Headrests comes with a headrest for your driver side seat and a headrest for your passenger side seat. Each one is made of premium vinyl that perfectly matches TMI Sport Series and Sport II Series Upholstery! These headrests have a four-position ratchet that allows you to easily adjust the headrest for maximum comfort. Installation is incredibly easy and won't require any welding, cutting or any other modifications. You have your choice of several different factory-correct colors, like bright red, palomino, white, saddle, parchment and more!
*The year range listed after a color in the drop-down menu denotes what year(s) the color is correct for.
TMI Products is an industry leader in Mustang upholstery, seat foam, consoles, door panels, headliners, and many other Mustang interior products. Each of their products is manufactured in the USA with attention paid to maintaining the highest quality, using the best materials available. With TMI, you know your Mustang is getting the best interior products on the market.
Order a Pair of TMI Sport Series Headrests for your 1965, 1966 or 1967 Mustang with TMI Sport or Sport II Series Seats from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
/** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$391.24
From: /** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$319.47
TMI Rear Seat Upholstery And Seat Foam Sport II Series With Pony Logo Without Console Pony Coupe 1965-1966/** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$916.30
For this installation you'll need a panel removal tool, 3/16 Allen key, a pick or an awl, razorblade, flashlight. If you have to modify your seat frame, you'll need a drill and a 5/16 drill bit and safety glasses. We have the seat out of the car to make it easier for you to see the installation. While it's easier to have them out, you actually can do it inside the car if you don't feel like removing your seat.
The first step is going to be to remove the seatback. The seatback is held on by door panel stock clips. Simply pop them up with your panel removal tool. Carefully work your way around the outside edge. We'll put that aside. This is a bracket for the headrest. We removed the hog rings from the top of our upholstery so you can get a better view of actually what we're doing. You don't have to do this for installation. This would make it easier for you to see. The bracket is going to slide in. You're going to put bolts from these two holes to hold the bracket in place. These holes are already open in the upholstery.
This is where the two of your top clips go for your seatback. On some seats provided hardware may not fit through the hole properly. If that's the case, you want to grab a 5/16 drill bit and open up the holes. We can install the brackets and install the hardware. We'll install the nut on the back and tighten them down. Now you want to grab an awl or a pick. I'm going to go straight up through the bracket to where it's installed and go straight up through these holes and poke holes through your seat foam and your seat upholstery. Now you want to find the holes and have a sharp knife and make an "X."
I'm going to cut a little bit smaller the first time. You can always open it up a little bit if you have to. If you cut too much off it's not going to look great. There's two different plastic inserts that come with each side. One has this little release which will allow you to adjust the height. We're going to install that one first. I'm going to make sure this lever is facing towards the inside of the car and the metal tab is at the bottom so the seat will release properly. I find it's best to use something like use your awl or another tool, come up from the bottom to line the hole up. Widen that over and then work it down into place. We're going to be going through some foam and the material you cut out that can take a little bit of work sometimes to get it into place. Before we put the seatback back on, we're going to install the headrest, make sure it works properly and clears back there and move it up and down, straight up and down or ratchet it. We're ready to reinstall our seatback. Line up all these original holes and push the clips back in.
The headrests do a great job with finishing off our Sport seat. The adjustability should make them comfortable for everybody, plus the added security is also nice as well. Installation will take you around an hour per seat. You'll be back on the road in no time.