TMI Sport R/Sport XR/Sport II/Sport R500 Seat Foam for all 1965, 1966 and 1967 Mustangs with Sport R, Sport XR, Sport II or Sport R500 Upholstery.
Add some extra comfort to your ride with this Sport R/Sport XR Sport II/Sport R500 Seat Foam from TMI. This styled seat foam is new & improved and features a more comfortable & luxurious feel from the side bolsters that provide more support. This seat foam is intended for use with TMI's Sport R, Sport XR, Sport II and Sport R500 seat upholstery sets for 1965, 1966 and 1967 Mustangs.
TMI's seat foam lets you reuse your stock seat frames and avoid fully replacing the entire seat. This allows for this seat foam to be easily fit and installed into your classic Mustang.
Features and Benefits:
- Larger and Deeper Bolsters for Support
- Increased Comfort
- Reuses Factory Seat Frames
- Easy to Install
- Maintains Proper Shape
- Molded Listing Wires
This TMI Sport seat foam works with the TMI Sport R/Sport XR/Sport II/Sport R500 seats and upholstery to provide more cozy seating, and will help keep you in your seat during high-performance driving. You'll receive foam for your seat back & seat bottom that will make it more comfortable while your cruise. The TMI seat foam is easy to install, with molded-in listing wires for easy covering which helps maintain the proper shape. It also uses the factory seat frames so you won’t need to replace the entire seat. Pick up this TMI seat foam and start feeling absolute luxury from the moment you sit down in your 1965-1967 Mustang.
*Available for a single seat or in a pair for both front bucket seats.
Please Note: Will not work with original style seat upholstery. For use with Sport R, Sport XR, Sport II and Sport R500 style seat upholstery only.
Purchase your TMI Sport R/Sport XR/Sport II/Sport R500 Seat Foam for your 1965, 1966 and 1967 Mustang with Sport R, Sport XR, Sport II or Sport R500 Upholstery from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
From: /** Note: This is used for related configurable parts to properly display price w/o regular price */?>Special Price:$126.04
TMI Upholstery And Seat Foam Kit Sport XR Series Front And Rear Buckets With Rear Console Coupe 1965-1967/** Note: This is used for related configurable parts to properly display price w/o regular price */?>Special Price:$1,785.59
TMI Upholstery And Seat Foam Kit Sport R Series Front And Rear Buckets With Rear Console Without Rear Pony Logos Pony Coupe 1965-1966/** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$1,798.99
TMI Upholstery And Seat Foam Kit Sport II Series Front And Rear Buckets Without Rear Pony Logos With Rear Console Pony Coupe 1965-1966/** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$1,637.99
Waylon: Thanks for having me Bill.
Bill: I'm sure that you get this a lot, but what does TMI stand for?
Waylon: TMI was founded in 1982 by four brothers whose last name is Tuccinardi. You get Tuccinardi Manufacturing Incorporated.
Bill: How did you get in to the Mustang market?
Waylon: Originally we started doing Volkswagen interiors, but we quickly saw the market demand for high-quality premium Mustang upholstery and so we have been doing that now for about 25 years.
Bill: Where do you manufacture your products?
Waylon: We manufacture in Corona, California, where we have about 140,000 square feet and nearly 200 employees who do 100% of our manufacturing right here in the U.S.A.
Bill: I hear that you have some new products for us today?
Waylon: I sure do. Do you want to take a look?
Bill: Sounds good. Waylon, a lot of our customers do not know a lot about seat foam and I hate to admit it, but I do not know much about it myself. What makes your premium different than your standard seat foam?
Waylon: That is a good question and I am happy to clarify, because we do get that question a lot. You know, on the surface these two foams appear almost identical. They are both '64 to '66, close cell high-density foam but the difference between our standard foam and our premium is when you get a little closer. Originally, foams were designed like this. Just an empty channel where you would hog ring through and the frustration would be is that you would blindly have to poke through this with your hog ring and find an attachment point on the back. What we have done, in order to save frustration, especially for the first time installer, if this is your first install on upholstery, this will definitely save you some time and again the frustration of blindly trying to find an attachment point.
We actually molded the listing channel directly in to the foam so that you can visually see it without having to, like I said, blindly search through the back of the foam, hoping to find the right place to attach. One more thing that I would like to point out that we do in order to ease the installation for the first time installer and actually the experienced installer is that normally you would have to lay down burlap in between the foam and the springs to help protect the foam from being punctured by the springs. Both of our standard and our premium foams come with a protective layer already adhered to the back of the foam. Again, this is so you don't have to use burlap in addition to this and it will suffice in keeping your foam safe from punctures from the springs.
Bill: Waylon, what model of Mustang do you offer foam for?
Waylon: We offer our standard and premium line for the '64 to '73 Mustang and then we pick it up again and do it from '79 to 2007 and that is including the special edition Mustang's like the Cobra, Bullitt, and Mach 1.