TMI SVO Style Sport Seat Foam for all 1990-1991 Mustangs with TMI 2003-2004 Cobra Style Seat Upholstery.
When you upgrade the seats in your 1990-1991 Mustang with TMI's 2003-2004 Cobra Style Seat Upholstery, TMI’s SVO Style Seat Foam is a must-have. You'll get that race-inspired look that you desire when you combine the Cobra seat upholstery with the aggressive design & additional bolsters of this SVO seat foam from TMI.
TMI has designed this seat foam to fit perfectly over your original seat frames, so you won’t need to replace the entire seat. This new seat foam is now available at CJ Pony Parts individually for your passenger or driver side front bucket seat, as well as a pair for both.
- Adds Extra Comfort & Style
- A Protective Layer Attached to the Bottom of the Seat Foam
- Extra Side Bolsters
- Adjustable Knee Bolsters
- Prevents Springs From Ripping Through
- Direct Fit Replacement
- Fits Driver or Passenger Side
- Reuses Stock Seat Frames
Please Note: The new seat foam doesn’t have the metal plate that is used to attach the seat belt guides to the seat frame on Convertible Mustangs.
TMI makes sure to add extra comfort and style to your pony with this new and improved SVO style seat foam. The SVO style seat foam features extra side bolsters, as well as adjustable knee bolsters, for increased support and a more comfortable feel. A protective layer is attached to the bottom of the seat foam that prevents the springs from ripping through the foam which makes for better durability than most seat foam. This seat foam fits over top of your driver or passenger side front bucket seat frames, making for a first-rate replacement while renovating your Mustang's interior.
This is the seat foam that is required when you are installing TMI's '03-'04 Cobra style seat upholstery into your Fox Body Mustang.
*This seat foam will NOT work with any original style seat upholstery. It is ONLY for use with TMI 2003-2004 Cobra Style Seat Upholstery.
TMI Products has been an industry leader for over 30 years with supreme-quality upholstery, door panels, consoles, seat foam and many other Mustang interior products. Each product is completely made in the USA with special attention being made to upholding the highest quality & using the best possibly materials, solidifying them as the best on the market.
Order TMI's SVO Style Sport Seat Foam for your 1990-1991 Mustang with TMI’s 2003-2004 Cobra Style Seat Upholstery from CJ Pony Parts today!
Similar Mustang PartsMore Seat Foam
Product ReviewsWrite a review
will your product work on low back sport seats
You Might Also Like
From:CJ's Low Price:$419.36
From:CJ's Low Price:$783.98
From:CJ's Low Price:$365.80
Waylon: Thanks for having me Bill.
Bill: I'm sure that you get this a lot, but what does TMI stand for?
Waylon: TMI was founded in 1982 by four brothers whose last name is Tuccinardi. You get Tuccinardi Manufacturing Incorporated.
Bill: How did you get in to the Mustang market?
Waylon: Originally we started doing Volkswagen interiors, but we quickly saw the market demand for high-quality premium Mustang upholstery and so we have been doing that now for about 25 years.
Bill: Where do you manufacture your products?
Waylon: We manufacture in Corona, California, where we have about 140,000 square feet and nearly 200 employees who do 100% of our manufacturing right here in the U.S.A.
Bill: I hear that you have some new products for us today?
Waylon: I sure do. Do you want to take a look?
Bill: Sounds good. Waylon, a lot of our customers do not know a lot about seat foam and I hate to admit it, but I do not know much about it myself. What makes your premium different than your standard seat foam?
Waylon: That is a good question and I am happy to clarify, because we do get that question a lot. You know, on the surface these two foams appear almost identical. They are both '64 to '66, close cell high-density foam but the difference between our standard foam and our premium is when you get a little closer. Originally, foams were designed like this. Just an empty channel where you would hog ring through and the frustration would be is that you would blindly have to poke through this with your hog ring and find an attachment point on the back. What we have done, in order to save frustration, especially for the first time installer, if this is your first install on upholstery, this will definitely save you some time and again the frustration of blindly trying to find an attachment point.
We actually molded the listing channel directly in to the foam so that you can visually see it without having to, like I said, blindly search through the back of the foam, hoping to find the right place to attach. One more thing that I would like to point out that we do in order to ease the installation for the first time installer and actually the experienced installer is that normally you would have to lay down burlap in between the foam and the springs to help protect the foam from being punctured by the springs. Both of our standard and our premium foams come with a protective layer already adhered to the back of the foam. Again, this is so you don't have to use burlap in addition to this and it will suffice in keeping your foam safe from punctures from the springs.
Bill: Waylon, what model of Mustang do you offer foam for?
Waylon: We offer our standard and premium line for the '64 to '73 Mustang and then we pick it up again and do it from '79 to 2007 and that is including the special edition Mustang's like the Cobra, Bullitt, and Mach 1.