TMI 2003-2004 Mach 1 Style Upholstery for all 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs.
Need to replace the upholstery in your 2003-2004 Mach 1 Mustang? Looking to re-style the interior of your 1999-2004 Mustang? Then don't hesitate on ordering TMI's 2003-2004 Mach 1 Style Upholstery. When you make this purchase, you'll need to decide whether you want upholstery for just your front bucket seats or a full set for the front & rear of your Coupe or Convertible. CJ Pony Parts strongly recommends always purchasing a full set unless you have deleted your rear seat.
Features & Benefits:
- Direct Fitment
- Adds Mach 1 State to Interior
- Leather or Vinyl Material
- Increased Bolstering
- Includes Euro Perforated Inserts & an Accent Stripe
- Variety of Color Options
- Comes with Matching Headrest Upholstery
This upholstery from TMI is designed to have a convenient direct fitment whether you are just replacing the upholstery in your Mach 1 or adding the aggressive Mach 1 look to your New Edge Mustang. The material is offered to you in a leather or vinyl upholstery option. The vinyl upholstery will use perforated vinyl in the insert section and the leather upholstery will use perforated leather. The leather buckets will come with leather sides, bolsters and inserts with a vinyl back. The seats will also feature unique Euro perforated inserts and an accent stripe.
The upholstery is also available in a variety of color options for you to choose from to best suit your interior. These colors, along with the Euro perforated insert, were not original to the 2003-2004 Mach 1, but are perfect for your Mustang when adding the Mach 1 look while keeping your original interior color. TMI also makes sure to include increased bolstering for more comfort along with matching headrest upholstery for your convenience.
*Although headrest upholstery is included, it is intended for the larger Mach 1 headrest. So V6 & GT seats will need to purchase smaller headrest upholstery separately or re-use the original headrest upholstery.
Tech Tip: Because Ford originally glued the rear seat upholstery to the rear seat foam, removal requires the old upholstery be peeled off the original set foam.
The required seat foam is available separately (SF28).
For over 30 years, TMI Products has been a leader in the industry with its highly-respected construction of upholstery, consoles, door panels and many other Mustang interior products. TMI makes each of their products in the USA and pay special attention to maintaining the highest quality, along with using the best materials available.
Go ahead and order this TMI 2003-2004 Mach 1 Style Upholstery for your 1999, 2000, 2001, 2002, 2003 or 2004 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
From: /** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$529.97
From: /** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$179.99
/** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$41.99
Waylon: Thanks for having me Bill.
Bill: I'm sure that you get this a lot, but what does TMI stand for?
Waylon: TMI was founded in 1982 by four brothers whose last name is Tuccinardi. You get Tuccinardi Manufacturing Incorporated.
Bill: How did you get in to the Mustang market?
Waylon: Originally we started doing Volkswagen interiors, but we quickly saw the market demand for high-quality premium Mustang upholstery and so we have been doing that now for about 25 years.
Bill: Where do you manufacture your products?
Waylon: We manufacture in Corona, California, where we have about 140,000 square feet and nearly 200 employees who do 100% of our manufacturing right here in the U.S.A.
Bill: I hear that you have some new products for us today?
Waylon: I sure do. Do you want to take a look?
Bill: Sounds good. If your Mustang is your daily driver, wear and tear is going to be inevitable. One of the first places that you will start seeing wear is on the seats. From getting in and out constantly, both the upper and lower bolsters will wear thin and eventually rip. Thankfully TMI has a solution for your late model Mustang.
Waylon: Yes. At TMI we manufacture upholstery for every year of the Mustang from '79 all the way up to 2007; covering every LX, every GT, and more recently we have moved in to the special production options of the Bullitt, Mach 1, and the '03, '04 Cobras. We have really begun to specialize in those rare-option seats. One thing that not everybody knows is that the seat that you are leaning on is a '99 to '04. Any one of those frames from a V6 or a GT, if it is worn out and you are looking to replace it, it can easily be upgraded to a seat like this '01 Bullitt here. It is the same frame and it is the same metal work. All you need is new foam and upholstery to turn that raggedy seat in to a high-performance bucket.
Bill: You are telling me that I can take a stock seat like this, a real basic boring seat, and make it in to a Mach 1, Bullitt, '03 Cobra.
Waylon: Yes, absolutely. If you want, I can show you right now. It is really that simple.
Waylon: Headrest goes.
Waylon: You want to grab that side? Just strip that off and get down to the bare metal. I happen to have this as your '03-'04 Cobra foam that I will slip over the top. Essentially, that is it. You can tell that it is the same size seat and the same size frame with new upholstery over the top of that. You just turned a raggedy beat up V6 cloth seat in to a high-performance bucket. It really is that simple.