TMI Black with White Stitching Sport R Series Pony Full Set Seat Upholstery for 1965-1966 Mustang Fastbacks.Replace your faded and worn out upholstery with TMI's new aftermarket Sport R seat upholstery. Whether you are replacing just the front buckets or the full set, TMI's 1965-1966 Sport R seat upholstery sets have combined the original interior look with added modern and aggressive styling for more stability and comfort for you. TMI's upholstery offers excellent quality and amazing value.
Features high-quality UniSuede inserts integrated into a stock pattern with premium vinyl sides that include contrast stitching around the perimeter of the seat. TMI is officially licensed by Ford and includes a brilliant copy of the Pony insert on their seats.
Full sets include upholstery pieces for both front bucket seats and the rear bench seat. Front buckets include driver side and passenger side upholstery. Front buckets require Sport R seat foam, which features side bolsters for added comfort. Re-use factory frames.
*This upholstery requires the use of Sport R seat style seat foam (SF41). This upholstery will NOT fit original style seat foam.
*CJ Pony Parts strongly recommends always buying a full set of Sport R upholstery, not just bucket seats, unless you have deleted your rear seat.
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$138.17
From:CJ's Low Price:$76.37
The Sport R has large bolsters in both the seat bottom and the seat back, which would make the seat very comfortable. It's also going to keep you in the seat during high-performance driving. The top and bottom features Uni Suede insert, and double stitched all the way or in the outside to give you a true custom look. As you can see, the back seat is a perfect match for our front seat. It has the same Uni Suede inserts, the same Pony design and the same black with the gray stitching as their front seats. The gray is actually available in red, black, white or blue stitching as well. Let's get these in our car. I'm going to start by installing the seat back. The frame is going to clip-in in these two tabs located right here. Now, I'm going to bolt-in the bottom. Now, I will install the seat bottom. I'm simply going to slide it in place under the backseat and push down to lock it in place.
We'll install our front seats. Just align them up with the holes on the floor and I'll put the bolts on from underneath. I'm going to install our passenger side seat. I'll re-install the seat nuts to the holes on the floor. We'll reinstall the rubber floor plugs. Our TMI Sport R upholstering foam is exactly what we're looking for our Weekend Wrench project car. It keeps the original look with a lot more comfort and a heck of a lot more support at the same time. Keep in mind for the front seat, you're going to use your original seat frame but use the foam and upholstery from TMI to get the unique look. For the rear seat, use the factory frame and the factory foam, and you're going to use new upholstery, make sure you check our other video, we'll give you all the information you need on how to re-upholster your seats.