Driver Side 1-Piece Torque Box for 1965-1970 Mustang Coupes and Fastbacks.An old or weak torque box can mean body flex or frame twisting which can do serious damage to your Mustang. If you need to replace the entire torque box, we recommend this one-piece style reproduction. Made from high-quality 14-gauge steel.
*Will fit 71-73 Mustangs with some modifications.
Product ReviewsWrite a review
Torque Box 1-Piece Driver Side Coupe/Fastback 1965-1970 is rated out of 5 by 2.
Rated 5 out of 5 by Scottstang from Thick Metal and Strong These Torque boxes are nice and thick. I'm replacing just the driver side due to rust. Removed the old torque box, cleaned up all the metal. For a 68 coupe, they dropped right in. I was suprised since they are the less expensive one.
Date published: 2015-01-07
Rated 4 out of 5 by jpinker1 from Torque box I have used this torque box twice and worth the money. Good fittment and quality
Date published: 2015-01-13
You Might Also Like
CJ's Low Price:$50.99
CJ's Low Price:$49.99
By Bill Tumas: We're here with a replacement front torque box for your 64-1970 Mustang Coupe or Fastback. Ford realized the benefit of the front torque boxes in convertibles and use them since 1965. By 1967, they had a driver side torque box in the Mustang, by 1968 all three body styles benefited from both front torque boxes. Even though your 65-66 Coupe never came factory with torque boxes, we strongly suggest adding them to your restoration to increase the strength of your front end. Our torque boxes are made of heavy gauge steel and they come pre-welded so they're ready to install. Here you can see the torque box installed on this 1965 Mustang Coupe; it's going to weld between your frame rail and your rocker to increase the strength of the front end of your car. Whether or not your Mustang came with torque boxes from the factory, when you're doing your restoration, we highly suggest adding a set to your build.